JVC HR-XVC33UM manual 42 EN, Load the disc, Pause playback

Filename [XVC33UM_08DVD.fm]
XVC33UM_01.book Page 42 Monday, August 4, 2003 7:24 PM	Masterpage:Left

42 EN OPERATIONS ON DVD DECK

Basic Playback

To play back a MP3/JPEG disc, see pages 62 – 67.

A Load the disc.

APress OPEN/CLOSE (x) on the DVD deck to open the

disc tray.

●The unit’s power comes on automatically.

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

BPlace the disc in the disc tray.

●For details, refer to “Placing a Disc” ( pg. 7).

CPress OPEN/CLOSE (x) on the DVD deck to close the

disc tray.

●Pressing PLAY (4) also close the disc tray.

●Playback begins automatically if the auto-playback DVD disc is loaded. Although the VCR deck is selected, the DVD deck is selected automatically if the VCR deck is in stop mode.

B Select the DVD deck.

On the unit

Press VCR/DVD repeatedly so that the DVD indicator lights up.

On the Remote

Press DVD so that the DVD indicator lights up.

ATTENTION

●You can not use the DVD deck when the VCR deck is in the Satellite Auto Recording standby and recording mode.

●You can use the DVD deck when the VCR deck is in the timer standby mode.

C Start playback.

Press PLAY (4).

Example: DVD VIDEO

Title number	Chapter	Elapsed time
	number

●It may take a few seconds to start playback.

●If you load a DVD disc whose region code does not match the

DVD deck, “REGION CODE ERROR!” appears on the TV screen. For details, refer to “Region Number” ( pg. 5).

●With Video CD discs with PBC control or some DVD discs, the menu display may appear on the TV screen after starting playback. In this case, select an item which you want to play back from the menu. Otherwise, the playback cannot go

forward. Refer to “Locating a desired scene using the menu of the Video CD with PBC” ( pg. 43) or “Locating a desired scene using the DVD menu” ( pg. 43).

D Pause playback.

Press PAUSE (9).

●To resume normal playback, press PLAY (4).

E Stop playback.

Press STOP (8). Press OPEN/CLOSE (x) on the DVD deck to open the disc tray, then remove the disc.

●Pressing PLAY (4) resume playback from the position where you stop playback. For details, see “Resume Function” on page 45.

NOTE:

When you press OPEN/CLOSE (x) while the unit is turned off, the unit’s power comes on and the disc tray opens automatically.

Page 42

4 August 2003 6:47 pm