JVC HR-XVC33UM manual Slow Motion, High-Speed Turbo Search, Pause during playback

Filename [XVC33UM_07S-VHS.fm]

	Masterpage:Right-No-Heading
XVC33UM_01.book Page 29 Monday, August 4, 2003 7:24 PM

EN 29

Playback Features

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Still Picture/Frame-By-Frame Playback

1Pause during playback.

Press PAUSE (9).

●If there is vertical jitter, press CH +/– on the Remote to correct the picture.

2 Activate frame-by-frame playback.

Press PAUSE (9) to advance a still picture.

Slow Motion

1 Pause during playback.

Press PAUSE (9).

2 Activate slow motion playback.

Press and hold PAUSE (9) for 2 seconds, then release. Press PAUSE (9) and release again to return to still picture.

● The speed changes for each direction by pressing REW (3) and FF (5) repeatedly.

NOTE:

During slow motion playback, some noise may appear on the TV screen. Press CH + or – on the Remote to eliminate the noises.

High-Speed (Turbo) Search

During playback, press FF (5) for forward high-speed search, or REW (3) for reverse high-speed search.

● The speed changes for each direction by pressing REW (3) and FF (5) repeatedly.

When pressing FF (5): (SP): +5x{+7x

(EP): +11x{+21x

When pressing REW (3):

Once REW (3) is pressed, reverse search starts in –1x normal playback speed. After this process, each press of REW (3) changes the search speed between –5x and –7x in SP mode, –11x and –21x in EP mode.

(SP): –1x]–5x{–7x

(EP): –1x]–11x{–21x

To resume normal playback, press PLAY (4).

ATTENTION

In the search, still, slow-motion or frame-by-frame playback mode,

●the picture will be distorted.

●the noise bars will appear.

●there may be a loss of colour.

●you cannot hear the sound.

Page 29

4 August 2003 6:42 pm