JVC HR-XVC33UM manual Dubbing, 70 EN, From DVD to VCR

Filename [XVC33UM_09Editing.fm]

XVC33UM_01.book Page 70 Monday, August 4, 2003 7:24 PMMasterpage:Left+

70 EN EDITING (VCR DECK) (cont.)

Dubbing

(from DVD to VCR)

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish.

However, it is not possible to dub the copy-protected disc. In such case, “ERROR” appears on the front display panel.

A Load a cassette and place a disc.

For the VCR deck

Insert a cassette with the record safety tab intact.

For the DVD deck

APress OPEN/CLOSE (x) on the DVD deck to open the disc tray.

BPlace the disc in the disc tray.

CPress OPEN/CLOSE (x) on the DVD deck to close the disc tray.

B Prepare the VCR deck for dubbing.

APress VCR.

BPress SP/EP to select recording speed.

CSearch for the point where you want to start dubbing by pressing PLAY (4), FF (5) or REW (3) then press STOP (8).

C Prepare the DVD deck for dubbing.

APress DVD.

BSearch for the point where you want to start dubbing by pressing PLAY (4), FF (5) or REW (3).

CPress PAUSE (9) to pause playback a little before the start point.

DStart dubbing.

Press and hold REC (7), then press PLAY (4) on the Remote.

●“DUB” lights on the front display panel.

E End dubbing.

Press STOP (8).

●Be sure to press STOP (8) while the VCR indicator lights up on the unit.

●If you press STOP (8) or EJECT (x) with the DVD deck selected, the dubbing stopped, but the opening screen is also recorded.

NOTES:

●You cannot start dubbing when the scan mode is set to the progressive mode. Set it to the interlace mode. ( pg. 82)

●Set “ON SCREEN GUIDE” to “OFF” ( pg. 81) if you do not want to record the on-screen display for DVD discs during dubbing.

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●The superimposed indication during the operation or dubbing is not recorded.

●Set “PICTURE CONTROL” to “EDIT”. ( pg. 76)

Page 70

4 August 2003 6:50 pm