JVC HR-XVC33UM manual Connection, 14 EN, DVD deck only, Set the VCR channel to off

Filename [XVC33UM_06Index.fm]
XVC33UM_06Index.fm Page 14 Tuesday, September 9, 2003 9:27 AM	Masterpage:Left+

14 EN INSTALLING YOUR NEW UNIT (cont.)

S-VIDEO

Connection

(DVD deck only)

ATTENTION

Be sure to connect the unit’s VIDEO OUTPUT (DVD/ VCR) connector to the TV’s VIDEO input connector.

Antenna or Cable
	Coaxial cable
	Flat feeder
		Matching transformer
		(not supplied)
AC outlet	S VIDEO OUTPUT		AUDIO OUTPUT
AC power cord			VIDEO OUTPUT

PCM/STREAM

OPTICAL COAXIAL

Back of unit		VHF/UHF
		IN
S-Video cable	Audio/video	VHF/UHF
(not supplied)	cable
	(not supplied)	OUT
		RF cable
		(supplied)

To S-VIDEO input	To 75 ohm
connector	Terminal
	TV

8To connect to a TV with S-VIDEO/AUDIO input connectors . . .

A Connect the unit to TV.

AConnect the antenna, unit and TV as per “AV Connection”. ( pg. 13)

BConnect the unit’s S VIDEO OUTPUT (DVD) connector to the TV’s S-VIDEO input connector.

B Connect the unit to power source.

Plug the end of the AC power cord into an AC outlet.

C Set the VCR channel to off.

Before performing the following steps:

●Make sure there is no cassette inserted in the unit.

●Make sure the unit is turned on, then press VCR/ DVD on the unit or VCR on the Remote so that the VCR indicator lights up.

AWhen the unit is turned off, press STOP (8) on the unit for more than 5 seconds. “3 CH” appears on the front display panel.

BPress CH +/– on the Remote to select “– CH” (off),

then press OK.

●If Plug&Play or Tuner setting has not previously been performed, the Language Select screen appears and Plug&Play takes place automatically.

NOTES:

●You can obtain high-quality S-VHS pictures when you play back discs on the DVD deck.

●If your TV is not stereo-capable, use the unit’s AUDIO OUTPUT connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction.

●To operate the unit with your TV using the S-VIDEO connection, set your TV to its AV mode. You can also use the

TV/VCR button on the unit’s Remote to set your TV to the AV mode. ( pg. 73)

●For switching the TV’s mode, refer to the instruction manual of your television.

Page 14

9 September 2003 9:26 am