JVC HR-XVC33UM manual Others Settings

Filename [XVC33UM_10Subsidiary.fm]
XVC33UM_01.book Page 81 Monday, August 4, 2003 7:24 PM	Masterpage:Right-No-Heading

				EN 81
Playback discs			Output
	STREAM/PCM		DOLBY DIGITAL/PCM	PCM ONLY
DVD VIDEO with
48 kHz, 16/20/24 bit linear			48 kHz, 16 bit linear PCM
PCM
DVD VIDEO with DTS	DTS bitstream		44.1 kHz, 16 bit stereo linear PCM
DVD VIDEO with Dolby	Dolby Digital bitstream			48 kHz, 16 bit stereo linear
Digital				PCM
Audio CD/Video CD		44.1 kHz, 16 bit stereo linear PCM
Audio CD with DTS	DTS bitstream		44.1 kHz, 16 bit stereo linear PCM
MP3 disc			Linear PCM

NOTES:

●The unit is not equipped with the DTS decoding function.

●When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit’s analog output connectors, which output incorrect signals that may damage your speakers.

●If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum.

Others Settings

* The default setting is bold in the table below.

8 RESUME	When this function is set to “ON”, you can use the resume function.
ON	( pg. 45)
OFF	ON:	You can start playback from the resume point of the
DISC RESUME	OFF:	placed disc.
		You cannot use the resume function.
	DISC RESUME:
		The unit retains a memory of the resume points of
		the last 30 discs played back, even though they
		have been ejected.

	NOTE:
	This function is not available for Audio CDs and MP3 discs.
8 ON SCREEN GUIDE	When this function is set to “ON”, the unit can display “on-screen
ON	guide” icons or characters which shows the conditions of the unit or
OFF	disc.

Page 81

4 August 2003 6:42 pm