JVC HR-XVC33UM Digital Audio Dubbing, Place a disc and load a MD, For the digital audio device

Filename [XVC33UM_09Editing.fm]
XVC33UM_01.book Page 71 Monday, August 4, 2003 7:24 PM	Masterpage:Right

EDITING (DVD DECK) EN 71

Digital Audio

Dubbing

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Recorder

Digital audio device (MD deck etc.)

Optical cable (not supplied)

Player

Rear of unit

DIGITAL AUDIO OUT

Note for connection: Remove the connector cover from the unit and remove the protection cap from the cable.

You can dub selected audio from the DVD or Audio CD disc to a MD etc.

However, it is not possible to dub the copy-protected disc.

Example: Dubbing to a MD

A Make connections.

Connect the optical cable between the unit and the digital audio device.

B Place a disc and load a MD.

For the DVD deck

APress OPEN/CLOSE (x) on the DVD deck to open the disc tray.

BPlace the disc in the disc tray.

CPress OPEN/CLOSE (x) on the DVD deck to close the disc tray.

For the digital audio device

Insert a MD.

C Prepare the DVD deck for dubbing.

APress DVD and select the audio to be dubbed.

BSearch for the point where you want to start dubbing by pressing PLAY (4), FF (5) or REW (3) then press STOP (8).

CPress REW (3) a little, then press PLAY (4) to start playback.

DPress PAUSE (9) to pause playback a little before the start point.

D Prepare the audio device for dubbing.

Select the input mode.

E Start dubbing.

APress PLAY (4) to start playback on the DVD deck.

BStart recording on the audio device.

F End dubbing.

Stop recording on the audio device. Then press STOP (8) to stop playback on the DVD deck.

NOTES:

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO OUTPUT” to “PCM ONLY”. ( pg. 79)

Page 71

4 August 2003 6:50 pm