Filename [XVC33UM_06Index.fm]

 

XVC33UM_06Index.fm Page 15 Tuesday, September 9, 2003 9:27 AM

Masterpage:Right-No-Heading

EN 15

Component Video Connection

(DVD deck only)

8To connect to a TV with component video input connectors . . .

A Connect the unit to TV.

AConnect the aerial, unit and TV as per “AV Connection”. ( pg. 13)

BConnect the unit’s COMPONENT VIDEO OUT connectors to the TV’s component video input connectors.

ATTENTION

Be sure to connect the unit’s VIDEO OUTPUT (DVD/ VCR) connector to the TV’s VIDEO input connector.

B Connect the unit to power source.

Plug the end of the AC power cord into an AC outlet.

Antenna or Cable

 

 

Coaxial cable

 

Flat feeder

 

 

 

Matching transformer

 

(not supplied)

 

AC outlet

COMPONENT

AUDIO

VIDEO OUT

OUTPUT

 

AC power cord

VIDEO OUTPUT

PCM/STREAM

OPTICAL COAXIAL

Back of unit

 

VHF/UHF

 

 

 

 

IN

Component

Audio/Video

VHF/UHF

Video cable

cable

OUT

(not supplied)

(not supplied)

 

RF cable (supplied)

To Component Video

To 75 ohm

Input connector

Terminal

 

TV

C Set the VCR channel to off.

Before performing the following steps:

Make sure there is no cassette inserted in the unit.

Make sure the unit is turned on, then press VCR/ DVD on the unit or VCR on the Remote so that the VCR indicator lights up.

AWhen the unit is turned off, press STOP (8) on the unit for more than 5 seconds. “3 CH” appears on the front display panel.

BPress CH +/– on the Remote to select “– CH” (off),

then press OK.

If Plug&Play or Tuner setting has not previously been performed, the Language Select screen appears and Plug&Play takes place automatically.

NOTES:

You can obtain high-quality component video pictures when you play back discs on the DVD deck.

If your TV is not stereo-capable, use the unit’s AUDIO OUTPUT connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction.

To operate the unit with your TV using the Component Video connection, set your TV to its AV mode. You can also use the

TV/VCR button on the unit’s Remote to set your TV to the AV mode. ( pg. 73)

For switching the TV’s mode, refer to the instruction manual of your television.

Page 15

9 September 2003 9:26 am

Page 15
Image 15
JVC HR-XVC33UM manual 8To connect to a TV with component video input connectors, Component Audio/Video, Video cable Cable