JVC HR-XVC33UM manual When this function is set to on

Filename [XVC33UM_10Subsidiary.fm]
XVC33UM_01.book Page 77 Monday, August 4, 2003 7:24 PM	Masterpage:Right-No-Heading

		EN 77
		* The default setting is bold in the table below.
8 VIDEO STABILIZER	When this function is set to “ON”, you can automatically correct vertical
ON	vibration in the picture when playing back unstable recordings made on
OFF	another recorder.
	NOTES:
	● When you finish viewing a tape, be sure to set this function to “OFF”.
	● Regardless of the setting, this function has no effect during recording and during special
	effects playback.
	● The on-screen display may jitter vertically when this function is set to “ON”.
	● To watch recordings with close-caption, set this function to “OFF”.
8 BLUE BACK	When this function is set to “ON”, the TV screen becomes all blue when
ON	receiving a channel not in use.
OFF	NOTE:
	When you want to receive an unstable channel with poor signals, set this function to
	“OFF”.
8 2ND AUDIO RECORD	● When this function is set to “ON”;
ON	If a SAP program is received, the SAP audio is recorded on both the normal and
OFF	Hi-Fi tracks. The main audio is not recorded.
	If a non-SAP program is received, the main audio is recorded on both the Hi-Fi
	and normal tracks.
	● When this function is set to “OFF”, the SAP audio cannot be recorded.
	NOTES:
	When the channel is changed on the unit;
	● The “STEREO” indicator appears on the screen for about 5 seconds if the program is a
	stereo broadcast.
	● The “SAP” indicator appears on the screen for about 5 seconds if the program is a SAP
	broadcast.
	● Both indicators appear when a stereo program is accompanied by SAP sound.
8 AUDIO MONITOR	This unit can record two sound tracks simultaneously (normal and Hi-Fi) on a
HI-FI	Hi-Fi stereo tape. You can select the sound track(s) to listen to while playing
HI-FI L	back a Hi-Fi stereo tape. In addition, when playing back a prerecorded tape
HI-FI R	containing two separate audio programs on the Hi-Fi tracks, you can choose
NORM	either one by selecting either “HI-FI L” or “HI-FI R”.
MIX	HI-FI:	Normally select this. Hi-Fi sound is played back.
	HI-FI L:	Sound on the left Hi-Fi channel is played back.
	HI-FI R:	Sound on the right Hi-Fi channel is played back.
	NORM:	Sound on the normal track is played back.
	MIX:	Both sounds on the Hi-Fi track and normal track are mixed
		and played back.
	NOTES:
	● While playing back a monaural tape, sounds on the normal track will be heard
	regardless of this setting.
	● You can also use the A.MONITOR button on the Remote to select the desired monitor
	sound. ( pg. 32)
8 AUTO POWER OFF	When this function is set to “3H”, the unit is turned off automatically if no
3H	operation is done within 3 hours. “AUTO POWER OFF IN 3 MIN” appears on
OFF	the screen 3 minutes before the unit is turned off.

Page 77

4 August 2003 6:42 pm