JVC HR-XVC33UM manual Select the start point

Filename [XVC33UM_08DVD.fm]
XVC33UM_01.book Page 51 Monday, August 4, 2003 7:24 PM	Masterpage:Right-No-Heading

EN 51

A-B Repeat Playback Time Search

You can repeat the desired part.

A Access the on-screen bar.

Press PLAY SETUP twice. The on-screen bar appears on the TV screen.

B Select menu item.

Press w e to move 0 to , then press OK.

●The following pop-up window appears under the selected item.

You can play back a disc from the desired point by specifying the elapsed time from the beginning of the current title (for DVD VIDEO) or the disc (for Audio CD/Video CD) using the Time Search.

When a PBC-compatible Video CD is played back, be sure to inactivate PBC function before you perform Time search by pressing the number keys instead of the PLAY (4) button when you start playback.

A Access the on-screen bar.

Press PLAY SETUP twice. The on-screen bar appears on the TV screen.

C Select the repeat mode.

Press rt repeatedly to select “A-B”.

D Select the start point.

Press OK at the beginning of the part you want to repeat (point A).

●The following display appears in the on-screen bar.

E Select the end point.

Press OK at the end of the part you want to repeat (point B).

●A-B Repeat Playback starts. The selected part of the disc (between point A and B) is played repeatedly.

To cancel A-B Repeat Playback

Repeat from step A, select “OFF” in step C, then press

OK.

●You can also cancel Repeat Playback by pressing SKIP (2) or SKIP (6).

To clear the on-screen bar

Press PLAY SETUP.

NOTES:

●A-B Repeat Playback may not work properly depending on the type of disc being used.

●The subtitles recorded around A-B point may not appear.

●The end of the item will be set as “B” point if the end of the item reached before you set the “B” point.

●When playing back a DVD, A-B Repeat Playback is possible only within the same title.

●“A-B” cannot be selected during Program and Random Playback.

●“A-B” cannot be selected while stopped.

B Select menu item.

Press w e to move 0 to , then press OK.

●The following pop-up window appears under the selected item.

C Select the time.

Press the number keys (0-9) to enter the time, then press

OK.

Example:

To play back from a point 2 (hours): 34 (minutes): 08 (seconds) elapsed

TIME	_ : _ _ : _ _	TIME	2 : _ _ : _ _
	Press 2		Press 3
TIME	2 : 3 _ : _ _	TIME	2 : 3 4 : _ _
	Press 4		Press 0
TIME	2 : 3 4 : 0 _	TIME	2 : 3 4 : 0 8
	Press 8

If you have specified a wrong selection,

Press w repeatedly until the wrong number is erased, then press number keys to enter the correct numbers.

●The unit starts playback from the specified time.

To clear the on-screen bar

Press PLAY SETUP.

NOTES:

●When “X” is displayed on the TV screen in step C, you have selected a point that excesses the recording time of the disc.

●Some DVD VIDEO discs do not contain time information, and it is no possible to use the Time Search function. In such a case, “X” is displayed on the TV screen as well.

●Time Search does not work while you play back the Video CD or SVCD with the PBC Function.

Reactivate the Playback Control (PBC) Function

You can reactivate the PBC function when you play back a PBC- compatible Video CD disc without PBC function.

●Press TOP MENU during playback.

Page 51

4 August 2003 6:47 pm