JVC HR-XVC33UM manual Load a cassette, Choose a program, Set the tape speed, Start recording

Filename [XVC33UM_07S-VHS.fm]

XVC33UM_01.book Page 33 Monday, August 4, 2003 7:24 PMMasterpage:Right-No-Heading

EN 33

Basic Recording
	A Load a cassette.
	Insert a cassette with the record safety tab intact.

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

●The unit’s power comes on automatically and the counter is reset to 0:00:00.

B Select the VCR deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the Remote

Press VCR so that the VCR indicator lights up.

C Choose a program.

Press CH +/– or the number keys to select the channel you wish to record.

D Set the tape speed.

Press SP/EP. The current setting appears on the front display panel or TV screen. Press SP/EP again to change the setting while the tape speed is displayed on the TV screen.

E Start recording.

Press and hold REC (7) and press PLAY (4) on the

Remote, or press REC (7) on the unit.

F Pause/Resume recording.

Press PAUSE (9). Press PLAY (4) to resume recording.

● You can select channel during the Record Pause mode.

G Stop recording.

Press STOP (8). Then press EJECT (x) on the VCR deck to remove the cassette.

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording or timer recording ( pg. 33, 34, 36), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired.

Page 33

4 August 2003 6:42 pm