JVC HR-XVC33UM manual 30 EN, Index Search Skip Search, Instant ReView, Activate Index Search

Filename [XVC33UM_07S-VHS.fm]
XVC33UM_01.book Page 30 Monday, August 4, 2003 7:24 PM	Masterpage:Left+

30 EN OPERATIONS ON VCR DECK (cont.)

Index Search

Skip Search

During playback, press SKIP SEARCH 1 to 6 times to skip over unwanted sections.

Each press initiates a 30-second period of fast-motion playback. Normal playback resumes automatically.

Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the unit is in the Stop mode.

Activate Index Search.

Press INDEX (2) or INDEX (6). “INDEX –1” or “INDEX 1” is displayed on the TV screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press INDEX (2) or INDEX (6) repeatedly until the correct index number is displayed.

Example:

To locate the beginning of B from the current position, press INDEX (2) twice.

To locate the beginning of D from the current position, press INDEX (6) once.

Current position

Index number

●When the specified index code is located, playback begins automatically.

Instant ReView

Simply by pressing a single button, the unit power comes on, rewinds, and begins playback of the last timer-recorded program. If you have several programs recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the unit is off and that the Timer mode is disengaged.

To resume normal playback during a Skip Search, press PLAY (4).

Activate Instant ReView.

Press . The unit power comes on and the unit searches for the index code indicating the start of the last timer-recorded program. Once it’s found, playback begins automatically.

●To watch the first of the 3 programs, press three times. The unit searches and begins playback automatically. You can access a program as far as 9 index codes away from the current tape position.

Page 30

4 August 2003 6:42 pm