JVC HR-XVC33UM manual 88 EN, Playback Timer Recording

Filename [XVC33UM_11Trouble.fm]
XVC33UM_01.book Page 88 Monday, August 4, 2003 7:24 PM	Masterpage:Left0

88 EN	QUESTIONS AND ANSWERS
PLAYBACK	TIMER RECORDING

Q. What happens if the end of the tape is reached during playback or search?

A.The tape is automatically rewound to the beginning.

Q.During search, slow, still and frame-by-frame playback, I can’t hear any audio. What’s the problem?

A.This is normal.

Q.Can the unit indefinitely remain in the still mode?

A.No. It stops automatically after 5 minutes to protect the heads.

Q.When returning from search to normal playback, the picture is disturbed. Should I be concerned about this?

A.No, it is normal.

Q.Noise bar appear during search. What’s the problem?

A.This is normal.

Q.Sometimes, during Index Search, the unit can’t find the program I want to see. Why not?

A.There may be index codes too close together.

Q.“” and “#” remain lit on the front display panel. Is there a problem?

A.No. This is a normal condition for a timer recording in progress.

Q.Can I program the timer while I’m watching a tape or a TV broadcast?

A.You won’t see the picture as it is replaced by the on-screen menu, but the audio from the program or tape you’re viewing can be heard.

RECORDING

Q. When I pause and then resume a recording, the end of the recording before the pause is overlapped by the beginning of the continuation of recording. Why does this happen?

A.This is normal. It reduces distortion at the pause and resume points.

Q.Can the unit indefinitely remain in the Record- Pause mode?

A.No. The unit goes to its Stop mode automatically after 5 minutes to protect the heads.

Q.What happens if the tape runs out during recording?

A.The unit stops recording, and “” and “$” on the front display panel won’t stop blinking.

Page 88

4 August 2003 6:50 pm