Masterpage:Right-No-Heading

EN 37

Filename [XVC33UM_07S-VHS.fm]
Page 37 4 August 2003 6:42 pm
FEnter the channel position.
Press CH +/–.
GSet the tape speed.
Press SP/EP.
HReturn to the normal screen.
Press PROG. or OK. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM NOT COMPLETED
PROGRAM OVERLAP” appears on the TV screen, see
page 40.
Repeat steps BH for each additional program.
IEngage the unit’s timer mode.
Press TIMER. The unit turns off automatically and “#
appears on the front display panel.
To disengage the timer mode, press TIMER again.
To Timer-Record Weekly Or Daily Serials:
— anytime during steps C through G, press WEEKLY (number
key “9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.
NOTES:
You can program this unit to timer-record as many as 8
programs. If you try to program the unit to record a ninth,
“PROGRAM FULL” appears on the TV screen. To record the
extra program, you must first cancel any unnecessary
programs. (pg. 39)
In case of a power failure after programing, the unit’s memory
backup keeps your selections for approximately 3 minutes.
Programs that start after midnight must have the next day’s
date.
Cable Box or DBS Receiver Users
To timer-record a satellite broadcast using Express Timer
Programing:
APerform steps AI. Enter “L-1” for the channel position
in step F.
BSet the DBS receiver to the appropriate channel before
the selected program begins.
CLeave the DBS receiver’s power on.
XVC33UM_01.book Page 37 Monday, August 4, 2003 7:24 PM