Getting Started

Features

Supports RAID1 (VR-N1600U/E)

Adding a built-in HDD enables support for RAID1.

RAID1 writes the same data to two hard disks simultaneously (mirroring), so that one of them remains usable when the other breaks down.

Automatic detection of network cameras

Significantly reduces the hassle of complex camera registration procedures.

Built-in large-capacity hard disk (500 GB) (VR-N1600U/E) Built-in hard disk (250 GB) (VR-N900U)

Supports HDD expansion

You can add 250 GB HDD for internal of VR-N900U, and 500 GB HDD for internal of VR-N1600U/E.

For external, up to 2 TB HDD units can be added for both models of VR-N900U and VR-N1600U/E.

Simultaneous recording up to 9 channels at 120 ips (VR-N900U)Equipped with 4-channel analog input (VR-N900U)

Display/Distribution performance at 80 ips (VR-N1600U/E) and 160 ips (VR-N1600U/E(A))

Display performance of 60 ips and distribution performance of 30 ips (VR-N900U)Enables simultaneous recording and playback

Playback of recorded images, jog dial playback and skip playback are possible while recording is in progress.

Direct Search

Enables you to retrieve data of a specific date/time or alarm position speedily.

Power failure recovery record

If a power failure occurs during recording, the system resumes recording in the mode selected before the power failure after recovery.

Alarm recording

Enables recording to start automatically in the alarm recording mode when alarm signal input is received during recording.

Motion Detect

Enables recording to start automatically when “motion” is detected in the preset live image. You can also specify the detection area for each camera.

Alarm Mail Notification

Enables notification by e-mails to be sent out when an alarm or motion is detected.

Simultaneous recording up to 16 channels at 160 ips (VR-N1600U/E)

Simultaneous recording up to 16 channels at 240 ips is possible when NVR Viewer is not started up.

In addition, purchasing additional camera licenses enables the VR-N1600U/E(A) to handle simultaneous recording up to 32 channels.

For details, please consult your nearest JVC dealer.

Supports cameras that allow bidirectional audio transmission (VR-N1600U/E)

Microphone audio that is input into the AUDIO IN 1 terminal is transmitted to the camera that supports bidirectional audio transmission, and output from the speakers connected to the camera.

How to Read this ManualDocuments

There are two documents on this unit.

(1) Startup Guide

This comes in a booklet together with this product. It is also available in the PDF file format. You can find it in the CD-ROM provided.

(2) Instruction Manual (PDF)

This manual is available in the PDF file format. You can find it in the CD-ROM provided.

Symbols Used in this Manual

Caution

Precautions to take during operation of this unit.

Notes

Details for reference, such as functions and

A

restrictions on uses.

Page or item to refer to.

 

Content of this Manual

●The copyright of this manual belongs to JVC. Reproduction or copy of this manual, in part or in whole, without the prior consent of JVC is strictly prohibited.

●Product names used in this manual are the trademarks or registered trademarks of the respective companies. Symbols such as ™, ®, and © are omitted in this manual.

●Milestone and XProtect Enterprise are the registered trademarks of Milestone Systems, Inc.

●Designs, specifications and other details used in this manual may be modified for improvement without prior notice.

●Images and illustrations of VR-N1600U/E are used in the explanation of this manual except for some special cases. When images or illustrations of VR-N900U are used, the model name is indicated at the top right corner of the illustration.

2