JVC LST0728-001C E-mailSettings

E-mail Settings						Item		Description
						A Enable E-		Select this check box to enable sending of
						mail(Monitor)		e-mail alerts.
						B Recipient(S)		For specifying the e-mail addresses to
		A
								send alerts to. If you are specifying more
								than one e-mail address, separate the e-
				B				mail addresses using semicolons.
						C Sender		For specifying the sender’s e-mail address,
						Settings		outgoing (SMTP) mail server name and
								login settings.
						D Subject text		For specifying the mail title.
					C
						E Message text		For specifying the message text.
						F Time		For specifying the time interval (minutes)
						btw.mail(min	for sending each e-mail alert.
						utes)
			D			G Include		Select this check box to include images in
						Image		the message.
		E				Memo :
						● You can send a test e-mail by clicking the [Test] button. If the e-
						mail address of the sender is not registered with the mail server
		F				of the recipient, the [The mail address of the sender is not valid.
						...] message may appear. When this occurs, double-check the
						sender’s e-mail address and outgoing mail server, and re-enter
						the e-mail address.
						● E-mail messages are sent in the following cases.
	G
						● When an input event occurs
[E-mal setup] Screen
						(A Page 96 [Specifying an Input Event])
						● When the event button is clicked
						(A Page 99 [Configuring Event Buttons])
						● When a generic event occurs
						(A Page 100 [Specifying Generic Events])
						● When motion is detected
						(A Page 105 [Specifying Motion Detection])
						● When camera failure occurs
						● When an archiving error occurs
						(A Page 108 [Archiving])
						● In order to send an e-mail via Motion Detection, you need to
						specify the timing for sending out e-mails in [Scheduler Setting]
						(A Page 53).
						● After you have completed the e-mail setting, perform a test to
						verify that it can be sent successfully.

107