Selecting a Language

The [Language Setting] screen appears when you start up this unit for the first time. Select the language to use using the steps below.

1 Select a language

●Use the [2/D] or [10/0/E](8/E) button to select a language.

2 Use the [SKIP] button to select [OK], followed by pressing the [16/ENTER](ZOOM IN/ENTER) button

●The AThe system is being set up.B message may appear depending on the setting, and the system is automatically rebooted.

Memo :

●Selecting [OK] changes the color of the [OK] characters from brown to orange.

Automatic Registration of Cameras

After you have started up this unit for the first time and finished selecting a language, the [Auto Detect] screen appears.

1 Check to ensure that [Auto Detect] is selected, followed by pressing the [16/ENTER](ZOOM IN/ ENTER) button

●The APlease wait...B message appears.

Memo :

●The characters of the selected item switches to orange color.

Memo :

●In the case of VR-N900U, the analog input appears on the [Auto Detect] screen from the start as the AAnalog-inBnetwork encoder (IP video server) of A192.168.201.12B.

2 Check to ensure that the camera is detected

●After the message disappears, a list of detected cameras is displayed.

●If all the cameras are not detected, press the [Auto Detect] button again. If doing so does not solve the problem, check the connection with the cameras and the IP address of the cameras.

3 Replace the detected camera accordingly in sequence

Use the [SKIP] button to select the Sort button, followed by pressing the [16/ENTER](ZOOM IN/ENTER) button to sort the order of the detected cameras in sequence.

●The Sort button allows you to perform [IP] sort, [MAC] sort, [CH] sort, [MAKER] sort, or [MODEL] sort.

●After using the [SKIP] button to select the list, followed by using [2/D] or [10/0/E](8/E) to select a camera, use the [SKIP] button to select [Up] or [Down], and press the [16/ ENTER](ZOOM IN/ENTER) button to change the sequence of the cameras.

●Deselect the check box of any camera that you are not using.

Note :

●Do not remove the check for Analog-In. (VR-N900U)

Memo :

●Priority is given to cameras at the top of the list during use, and camera numbers will be registered in sequence from the top.

●Devices other than the cameras may appear in the list. Uncheck the boxes of these devices.

4 Use the [SKIP] button to select [Entry], followed by pressing the [16/ENTER](ZOOM IN/ENTER) button

●The camera that is automatically detected is registered in the system.

5 Select the analog input channel and signal format to be used (VR-N900U)

VR-N900U

5

23