Applications

Auto Detect Settings (continued)

Using the Auto Detect Feature

The Auto Detect feature enables automatic detection of network cameras.

Memo :

●When multicast packets are configured such that they do not pass through the network equipment, such as a switching hub, the Auto Detect of the camera may not function properly.

The [IP Information] list contains information on the IP address of the automatically detected camera, MAC address, number of video CH, manufacturer, and model.

1VR-N900U

2

3

4

5

1 Click [Auto Detect]
3 Configure the analog input (VR-N900U)

●For specifying the number of channels and format of the analog input to be used.

Note :

●If the signals of the analog camera connected to the rear panel [VIDEO IN1 to 4] terminal are different from those in the [AnalogInput] settings (NTSC/PAL), a message indicating AENCODE ERROR(format)B will appear. In this case, click the [OK] button using the mouse to hide the AENCODE ERROR(format)B message, followed by specifying the NTSC/ PAL selection for [AnalogInput] correctly.

●For details on how to use the mouse, refer to [Character Input and Mouse Pointer] (A Page 28).

4 Click [Entry]5 Click [OK]

●The [Camera Record Setting] screen appears.

6 Click the [Close] button on the [Camera Record Setting] screen

●The Default View is automatically created. To save this view, change its name.

Memo :

●The Default View created by the Auto Detect feature may change the camera placement in the view. To maintain a fixed position, name the view and save it.

Note :

●Select ADo not detect in the future.B check box on the [Detect Device] screen during the Auto Detect operation if you do not want the [Detect Device] screen of that camera to appear during subsequent Auto Detect operations. For cameras that you have excluded from detection, you can add (A Page 86) them again manually at a later time.

●Auto Detect starts and the camera image appears on the screen.

2 Replace the detected camera accordingly in sequence

●You can click the Sort button to sort the order of detected cameras.

●There are five types of sort buttons, including Sort by [IP], Sort by [MAC], Sort by [CH], Sort by [MAKER], and Sort by [MODEL] buttons.

●Select the detected cameras, followed by clicking the [Up] or [Down] button to change the order of the cameras.

●Deselect the check box of any camera that you are not using.

Memo :

●The camera at the top of the list is used with priority.

114