JVC LST0728-001C Memo :,  Enable, Applications, Auto Detect Setting

Applications

Main Menu List (continued)

Auto Detect Setting

This section enables you to assign an IP address to each camera and configure various auto detect settings. For procedures on using the Auto Detect feature, refer to [Auto Detect Settings] (A Page 113).

A

E

B

C

F

D

G

T VR-N900U only

Item	Preset Values		Description	Reference
				Page
A IP Lease	 Enable	For configuring the function to assign IP addresses to each		A Page 113
	Disable	network camera.
		Memo :

●In order to assign an IP address of the network camera using the IP Lease feature, you need to enable the DHCP of the network camera. For procedures to enable the DHCP of the network camera, refer to the [INSTRUCRTIONS] of the network camera.

●If a network uses a multiple number of this product, enable [IP Lease] only for one unit. Select ADisableB if a DHCP server is operating on the same network. When the [IP Lease] is enabled for two or more devices at the same time, the IP address may change to a static address, and cause malfunction of the cameras.

80