Auto Detect Settings

This section enables you to assign an IP address to each camera and configure various auto detect settings.

Specifying IP Lease

For configuring the function to assign IP addresses to each network camera.

Note :

●In order to assign an IP address of the network camera using the IP Lease feature, you need to enable the DHCP of the network camera. For procedures to enable the DHCP of the network camera, refer to the instruction manual of the network camera.

1 Select [Auto Detect Setting] from [Main Menu]

●The [Auto Detect Settings] screen appears.

2

3

4

[Auto Detect Settings] Screen

2 Select [Enable] in [IP Lease]

Memo :

●If a network uses a multiple number of NVR units, enable the [IP Lease] only for one unit. Select [Disable] if a DHCP server is operating on the same network.

●When the [IP Lease] is enabled for two or more devices at the same time, the IP address may change to a static address, and cause malfunction of the cameras.

3 Specify the following items under [IP Lease Parameter]

Item

Description

 

 

Start Address

For specifying the first IP address to be

 

assigned to the cameras.

 

 

Unit

For selecting the number of IP addresses

 

to be assigned to the cameras. The

 

selected number of IP addresses will be

 

assigned starting from the first IP address.

 

 

Subnet Mask

For specifying the subnet mask for the

 

cameras.

 

 

Default Gateway

For specifying the gateway for the

 

cameras.

 

 

DNS Server

For specifying the DNS server address for

 

the camera(s).

 

 

Domain Name

For specifying the domain name for the

 

cameras.

 

 

Lease Time Limit

For specifying the valid period of the IP

 

address assigned to the cameras. If AYesB

 

is selected, you can set the lease time in

 

units of hours.

 

 

Client

For selecting whether to apply restrictions

 

on the device when assigning the IP

 

address. If AOnly CameraB is selected, IP

 

address will only be assigned to the

 

corresponding camera. If AAny ClientB is

 

selected, IP address will be assigned to all

 

devices.

 

 

Reserve MAC

Configure the [Reserve MAC Address] if

Address

you want to assign a specific IP address to

 

the cameras. A specific IP address is

 

always mapped to a MAC address. Enter a

 

value in the MAC and IP fields, and click

 

[Add] to set the addresses. To cancel the

 

setting, select a displayed MAC and IP

 

address, and click [Del].

 

 

4 Click [OK]

●Doing so hides the setting screen and starts IP Lease.

●Select ADisableB in Step 2 to stop IP Lease.

113