JVC LST0728-001C Settings, Basic Operation

Basic Operation

Recording Camera Images (continued)

Settings

(R: Factory settings)

	Item		Preset Values		Description
A Speedup Settings
	Frame Rate		^	Enables you to specify the frame rate to acquire from the camera. This is the frame rate
				during speedup recording. Specify the frame rates such that the total rate of all cameras
				displayed in each view of the [Live Viewing] screen does not exceed 80 ips (image per
				second) for VR-N1600U/E, 160 ips for VR-N1600U/E(A) , and 60 ips for VR-N900U.
				When playing back the recorded images of VR-N1600U/E(A), set the total display rate to
				80 ips or below to display the playback from the main unit and distribution for 13 channels or
				more simultaneously.
				Note :
				● Do not set a value that exceeds the camera’s capacity.
				● If the frame rate is not specified for the camera, a frame rate that is supported by the
				camera is automatically set.
B Live Settings
	Frame Rate		Same as recording	Displays the viewing frame rate of the [Live Viewing] screen.
		●	Same sa speedup	Same sa speedup:
				Displays live images using the frame rate specified in the [Speedup Settings] item A.
				Same as recording:
				Displays live images using the frame rate specified in the [Recording Settings] item E.
				When speedup is set to AONB and the recording frame rate increases such as due to
				detection of motion, the live viewing rate also increases.
C Camera			Show Motion	Select the ADisabledB checkbox to disable the camera.
	Monitor		Show Regions	Memo :
	Setup		Update on motion only	● AShow MotionB, AShow RegionsB and AUpdate on motion onlyB cannot be selected.
		●	Disabled
D Audio			Audio1	You can select the audio source to play back when a camera is selected in the NVR Viewer.
	Source			You can also specify the audio source in the NVR Viewer if the audio source is included in the
				source to be exported in the [Database Export...] format. (A Page 47 [Writing Images/Audio
				Sound to CDs, DVDs and Other Media (Export)])
				This has no impact on audio recording.
E Recording Settings
	Desired		[none]	Enables you to specify the recording frame rate. You need to specify a value that is larger than
	framerate			the [Frame Rate] of the [Speedup Settings] item A. Specify the frame rates such that the total
				rate of all cameras displayed in each view of the [Live Viewing] screen does not exceed 80 ips
				(image per second) for VR-N1600U/E, 160 ips for VR-N1600U/E(A), and 60 ips for VR-N900U.
				Note :
				● See below for the recordable frame rate of each model. Set the total frame rate of all
				cameras so that it does not exceed the respective values. When speedup settings are
				used, restore the frame rate of the speedup settings to the original value.
				● VR-N1600U/E :160 ips or below (When using NAS: 80 ips or below)
				● VR-N900U(A),(B):120 ips or below (When using NAS: 60 ips or below)
				Analog input of VR-N900U(A),(B): 60 ips or below
				Analog input of VR-N900U: 20 ips or below
				● Recording frame rate may fall below the preset frame rate depending on the signal
				processing condition of this unit.
				● Recording frame rate may deteriorate under the following conditions:
				● During export
				● When changing the picture quality of the displayed image
				● When the total frame rate of the display images (including display on PC) exceeds 80
				ips for VR-N1600U/E, 160 ips for VR-N1600U/E(A), and 60 ips for VR-N900U
				● When the frame rate is set to a high value, the recording frame rate may be slightly higher
				or lower.

56