JVC LST0728-001C Memo :, Note :, 3 Click the [Connect] button, Login to NVR Viewer (Continued), 2 Specify your login information in the following fields

Login to NVR Viewer (Continued)2 Specify your login information in the following fields

					A
							B
					C
						D
					E	F
● VR-N1600U/E				● VR-N900U
User name :vr-n1600				User name : vr-n900
Password :vr-n1600				Password :vr-n900
		Item		Description
A Server			For specifying the IP address and port
		address	number of this unit. (For example, in the case
			of [http://192.168.1.253:80], [:80] is the port
			number.)
			The port number is the number as specified
			in [Server Configuration] under [Image
			Server Setting]. (A Page 77)
B Authentication			For selecting one of the three types of
			authentication.
			Select ABasic authenticationB.
	Windows		Windows authentication. Login as the current
	authentication		Windows user.
	(current user)
	Windows		Windows authentication.
	authentication		You can login as a Windows user, but a user
			name and password will be required.
	Basic		Basic authentication.
	authentication		A user name and password will be required
			to login to this unit.
C User name			For entering the Windows user name if you
			have selected AWindows authenticationB for
			the [Authentication] item B. For entering the
			user name registered in the [User
			Administration] item under [Image Server
			Setting](A Page 118) if you have selected
			ABasic authenticationB.
D Password			For entering the login password for this unit if
			you have selected AWindows authenticationB
			for the [Authentication] item B. For entering
			the password registered in the [User
			Administration] item under [Image Server
			Setting](A Page 118) if you have selected
			ABasic authenticationB.

ItemDescription

E Remember Saves the password. password If you have selected AWindows

authenticationB or ABasic authenticationB for the [Authentication] item B, selecting this check box enables you to login the next time simply by clicking the [Connect] button.

F Auto-loginEnables you to login automatically. Select this check box to enable you to login to [NVR Viewer] automatically.

3 Click the [Connect] button

●The NVR Viewer screen appears after a short while.

Memo :

●If you have previously logged in to the NVR Viewer, a message will appear asking if you want the view that was used during the last login to be displayed. (Only when connecting from a surveillance computer)

[Main View]:

Select this check box to restore the view that you last used in the main window of the [NVR Viewer].

[Detached Views]:

Select this check box to display the views on the [Primary Display] screen, multi-monitor, or floating screen.

Note :

●When you log out after reaching the maximum number of distribution clients, you may need to wait for several minutes before you can establish the connection again.

●When multiple computers are connected and audio sound is played back, the sound may be distorted.

4 Set the display language according to the country of use

AClick the [K] button at the top right corner of the screen.

BSelect [Language] from the menu that appears.

CSelect the language used in your country from the displayed submenu.

DClick [OK] when you see a dialog box.

EClick the [] button at the top right corner to exit the NVR Viewer.

BThe viewer will display in the selected language during the next startup.

[K] Button [] Button

125