Searching Recorded Image from the Alert List

A list of recorded images is displayed for each [Alart], such as when motion is detected (A Page 105).

1 Double-click the [Alerts] bar on the [Browse] screen2 Click [] on the [Alerts] list and select an event from the list

●You can select a specific event, camera or [Server].

[Alerts] List

NVR Viewer

[PLAY] Screen

Event List

3 Click the [Get List] button

●A list of detected events appears.

●You can click on the event list to view recorded images of the selected event.

Memo :

●The Alerts list displays events occurring around the time (approx. 1 day before and after) set in [Time Navigation].

Smart Search

Smart Search enables you to search the parts with motion by specifying the search area within the recorded images of the selected camera.

1 Double-click the [Smart Search] bar on the [Browse] screen

NVR Viewer

5

6

2

 

 

 

 

 

 

 

 

 

4

[Browse] Screen

 

 

 

 

 

 

 

 

 

 

 

7,82 Tick [Show Grid] in [Search Area] setting3 Select the camera to display

●A blue grid overlay appears.

4 Click and drag within the screen to specify the search area.

●The areas that you have selected become transparent.

●Selecting the [Include] checkbox adds the dragged section to the search area. Selecting the [Exclude] checkbox deletes the dragged section from the search area.

5 Select the sensitivity level from the [Sensitivity] list in [Search Setup]

●The setting values are as follows. [Very High]

[High]

[Medium]

[Low] [Very Low]

6 Set the time interval in the [Interval] list

7 Press the [Previous] or [Next] button to search through data for which motion has been detected within the area

●Smart Search begins. When motion is detected inside the selected area, it will be highlighted in the view.

Note :

●Smart Search is carried out in the [Forward] and [Backward] directions from the time of the image you are viewing.

●Smart Search that is performed during recording may lower the recording frame rate. Check the performance meter while adjusting the playback speed to ensure that the display does not turn red.

8 To continue searching, click the [Previous] and [Next] buttons

Memo :

●You can use the [Save] button to temporarily save the area that you have selected in Step 4.

To return to the saved area settings, click the [Load] button after selecting another area.

●To cancel the area selection, tick [Exclude] and drag all the areas.

45