JVC LST0728-001C manual 80

Applications

Main Menu List (continued)

Unit Setting 2

A

B C

					D
	Item	Preset Values		Description		Reference
						Page
A HDD meter
	Display at startup	Select check box	Select this check box to display the HDD meter when the			A Page 133
		● Do not select check box	system starts up.
			● For details on HDD meter, refer to [HDD Meter] (A Page 133).
B Clock setting
	Display at startup	Select check box	Select this check box to display the clock when the system			A Page 152
		● Do not select check box	starts up.
	Display at date	Select check box	Select this check box to display the date on the clock.			A Page 152
		● Do not select check box
	Display at second	Select check box	Select this check box to display the seconds on the clock.			A Page 152
		● Do not select check box
C SNMP setting
	Enable of SNMP	Select check box	Select this check box to enable the SNMP function.			A Page 134
		● Do not select check box
	Enable of TRAP	Select check box	Select this check box to enable the TRAP function.			A Page 134
		● Do not select check box
	SNMP manager’s	^	Specify the IP address of the SNMP manager. (IP address)			A Page 134
	address
	Community name	^	Specify the SNMP community name. (1 to 32 characters.			A Page 134
			Alphanumeric characters only.)
	Confirmation interval	10 seconds	Specify the interval to monitor the alarm.			A Page 152
	of alarm		(10 to 9999 seconds)
	Confirmation interval	10 seconds	Specify the interval to monitor CPU usage.			A Page 152
	of CPU usage		(10 to 9999 seconds)
	Confirmation interval	60 seconds	Specify the interval to monitor the writing rate to the D drive.			A Page 152
	of D-drive		(30 to 9999 seconds)
	Confirmation interval	10 seconds	Specify the interval to monitor the startup status of NVR viewer.			A Page 152
	of NVR Viewer		(10 to 9999 seconds)
	Confirmation interval	60 seconds	Specify the interval to monitor connection status of the camera.			A Page 152
	of camera		(60 to 9999 seconds)
	Copy extension MIB onto the flash memory		Copy the MIB extension information into a flash memory device.			A Page 134
			● For details on SNMP settings, refer to [Setting SNMP]
				(A Page 134).
D OK/Cancel		^	OK: Exits after entries and the selected content are configured			^
			to the system.
			Cancel: Exits without saving all entries and selected settings.

72