Applications

Defining a Preset PTZ Position (continued)

Moving to Preset Positions by Events

This feature enables the PTZ camera to move automatically to a preset position when an event occurs.

1 Display the [PTZ Preset Positions for Device Name] window (A Page 90)
Defining a Preset Position

1 Display the [PTZ Preset Positions for Device Name] window (A Page 90)

[PTZ Preset Positions for Device Name] Window

2 Move the camera and determine the position using the [PTZ View]

3 Select an item in the [Preset Positions] list to register the preset position to.

●The position at the top of the list corresponds to Preset Position 1.

●The number of preset positions that can be registered may differ according to the camera in use.

4 Click the [Set Position] button and name the preset position
2 Select the [Goto preset on event] check box under [Preset Position on Events]3 Click the [Setup...] button

2

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

[PTZ Preset Positions for Device Name] Window

4 Select a preset position from the [Available Preset Positions] list5 Select an event from [Available Events]6 Click the [] button

●Doing so copies the selected event to the list on the right. This list shows events that are assigned by the selected preset position.

4 5 6

5 To define another preset position, repeat Steps2 to 4

Memo :

●To remove the association between a preset position and an

event, select the event from the list on the right and click the

button.

92