JVC LST0728-001C List of TRAP Supported by this Unit, List of Status that can be Obtained from this Unit

List of Status that can be Obtained from this Unit

iso(1) - org(3) - dod(6) - internet(1) - private(4) - enterprises(1) - jvc(718) - nvr(916) - nvrObjects(1)

	Group	Identifier	Name	SYNTAX	MAX-ACCESS	UNITS	Explanation
				INTEGER {
		1	nvrRecStatus	off(0),	read-only	-	REC status
				on(1)
				}
				INTEGER {
				off(0),
		2	nvrRecMode	recCtrl(1),	read-only	-	REC mode
				recAll(2)
Current Value	nvrStausGroup(1)			}
		3	nvrLastAlarmDate	DateAndTime	read-only	-	Latest alarm date
		4	nvrCpuUsage	INTEGER(0..100)	read-only	%	CPU usage rate
		5	nvrDdriveWrite	INTEGER(0..	read-only	Byte/	Writing rate to D
				4294967295)		Sec	drive
				INTEGER {
		6	nvrRunViewer	stop(0),	read-only	-	Viewer execution
				run(1)			status
				}
		1	nvrWarningTable	SEQUENCE OF	not-accessible	-	Table of last 10
				nvrWarningEntry			warnings
				nvrWarningEntry
		1.1	nvrWarningEntry	INDEX {	not-accessible	-	Entries of last 10
				nvrWarningIndex			warnings
Warning List	nvrWarningGroup(2)
				}
		1.1.1	nvrWarningIndex	INTEGER(1..10)	read-only	-	Index of warning list
		1.1.2	nvrWarningDate	DateAndTime	read-only	-	Dates when
							warnings occurred
		1.1.3	nvrWarningInfo	DisplayString	read-only	-	Warning information
		1	nvrRegistCameraTable	SEQUENCE OF	not-accessible	-	Table of 32
				nvrRegistCameraEntry			connected cameras
				nvrRegistCameraEntry
		1.1	nvrRegistCameraEntry	INDEX {	not-accessible	-	Entries of 32
				nvrRegCamIndex			connected cameras
				}
		1.1.1	nvrRegCamIndex	INTEGER(1..32)	read-only	-	Index of connected
Camera List	nvrCameraGroup(3)						cameras list
		1.1.2	nvrRegCamIpAddress	IpAddress	read-only	-	IP addresses of
							connected cameras
		1.1.3	nvrRegCamName	DisplayString	read-only	-	Camera names
				INTEGER {
		1.1.4	nvrRegCamConnectio	disconnect(0),	read-only	-	Camera connection
			n	connect(1)			status
				}

List of TRAP Supported by this Unit

iso(1) - org(3) - dod(6) - internet(1) - private(4) - enterprises(1) - jvc(718) - nvr(916) - nvrTraps(2)

Identifier	Name	OBJECTS	STATUS	Explanation
1	nvrRecStatusChange	nvrRecStatus,	current	Notification of REC status change
		nvrRecMode
2	nvrNotifyAlarm	nvrAlarmDate	current	Notification of alarm occurrence
	nvrNotifyWarning	nvrWarningIndex,	current	Notification of warning occurrence
3		nvrWarningDate,
		nvrWarningInfo
	nvrNotifyCamConnect	nvrRegCamIndex,	current	Notification of camera connection
4		nvrRegCamIpAddress,		status change
		nvrRegCamName,
		nvrRegCamConnection

135