A

B

C

D

[Live] Screen

AEvent indicator (Left: yellow)

Lights up when events specified in the [Camera Record Setting] occur. The indicator appears black if event indication has not been specified for the camera in question, or if no specified event has occurred.

BMotion indicator (Center: red)

Lights up when motion is detected.

COnline indicator (Right: green)

Blinks every time an image is received from the camera.

DOperating status of the camera (Characters to the left of the indicator)

Display

Status

 

 

Live (Green)

When live images are displayed without

 

being recorded

 

 

Recording (Red)

When recording is in progress

 

 

Stop (Yellow)

When images are not acquired from the

 

camera, or when the camera is in the

 

offline mode (A Page 53)

 

 

●You can press the [ALARM CLEAR] button to hide the event indicator and motion indicator.

●The image bar displays the name of the camera as well as the name of the device to which the camera is connected.

●Entering the number of the selected camera switches to an enlarged display. To return to normal display, enter the camera number of the enlarged display. You can identify the camera number of the [Camera Record Setting] screen of the main menu.

Operating the Camera

PTZ stands for pan, tilt and zoom.

If the camera supports the PTZ functions, you can use the keypad, and the [16/ENTER](ZOOM IN/ENTER) and [13/CANCEL](ZOOM OUT/CANCEL) buttons to move the camera up/down (tilt), left/right (pan), or enlarge/reduce the image (zoom).

Pan/Tilt1 Press the [PTZ/PRESET] button to switch the keypad to the PTZ mode

●The [PTZ/PRESET] indicator lights up.

●Press the button to switch between the APTZ ModeB (indicator lights up) and APreset ModeB (indicator blinking).

2 Press the 1 to 9 key on the keypad

●Pans/Tilts in the direction indicated by the arrow on the keys.

●Press the [6/HOME](5/HOME) key to move to the home position.

Zoom In/Zoom Out

1 Press the [PTZ/PRESET] button to switch the keypad to the PTZ mode

●The [PTZ/PRESET] indicator lights up.

●Press the button to switch between the APTZ ModeB (indicator lights up) and APreset ModeB (indicator blinking).

2 Press the [15/ZOOM IN](ZOOM IN/ENTER) or [14/ ZOOM OUT](ZOOM OUT/CANCEL) button

Using Preset Positions1 Press the [PTZ/PRESET] button to switch the keypad to the Preset mode

●The [PTZ/PRESET] indicator starts blinking.

●Press the button to switch between the APTZ ModeB (indicator lights up) and APreset ModeB (indicator blinking).

2 Enter the preset number using the keypad

●Enter using the [1] to [16] keys in the case of VR-N1600U/ E, and [0] to [9] in the case of VR-N900U.

●The camera moves to the preset position.

Memo :

●You can specify a camera number between 10 to 19 by pressing [10/0] followed by a number from [10/0] to [9]. (VR-N1600U/E)

●You can specify a camera number between 10 to 19 by pressing [0] followed by a number from [0] to [9]. (VR-N900U)

●To specify a number beyond 20, use the mouse to make a selection from the [Presets:] list in the [PTZ Control] section.

Note :

●You need to specify the preset positions in advance in order to use the preset feature. (A Page 92 [Defining a Preset Position])

35