Camera Output Settings

You can assign external outputs specified on the [I/O Setup] screen to a camera, such as sounding of a siren or switching on of lights.

●The assigned outputs can be triggered automatically when motion is detected, or manually by pressing the output buttons.

●You can display the [Output Settings] screen by clicking the [Outputs...] button on the [Camera Recording Administator] screen (A Page 55).

Specifying Output via Motion Detection

You can specify outputs to be triggered automatically when motion is detected.

1

Select an output from the [All Output] list

2

Click the

button between the [All Output]

 

and [On Motion Detected] lists

●Doing so copies the selected output to the [On Motion Detected] list.

●To delete an output from the [On Motion Detected] list,

select the output and click the button between the [All Output] and [On Motion Detected] lists.

[Output Settings] Screen

Specifying Output During Manual Control

You can specify outputs to be triggered manually using the output

[Output Settings] Screen

button or from a list on the [Live] screen.

 

1

Select an output from the [All Output] list

 

2

Click the

button between the [All Output]

 

 

and [On Manusl Control] lists

 

●Doing so copies the selected output to the [On Manusl Control] list.

●You can use the Up/Down buttons at the top right corner of the [On Manusl Control] list to move the selected output upward/downward within the [On Manusl Control] list.

●To delete an output from the [On Manusl Control] list,

select the output and click the button between the [All Output] and [On Manusl Control] lists.

[Output Settings] Screen

103