Getting Started

Part Names and Functions (VR-N900U)

Front Panel

 

 

 

V

U

T

S

A

 

 

R

 

 

Q

B

 

 

 

 

 

CDE FG HI J K L M N O

P

A [OPERATE] Button/Indicator

 

Note :

 

Switches operation on or off. Press the button to turn operation AONB and hold down the button to turn operation AOFFB. The indicator blinks while the recorder is starting up or shutting down.

B[REC CONTROL] Button/Indicator

●Attach the serial port cover supplied with this product if this port is not in use.

●This product may malfunction due to the presence of static electricity. Remove any static before starting operation.

Switches the recording control mode on or off. The indicator lights up when the recording control mode is set to on.

Press and hold the [FUNCTION] button, and press the [REC CONTROL] button at the same time to display the menu.

Memo :

●The main menu cannot be displayed in the recording control mode or during recording.

●The recording control mode performs recording in accordance with the settings in the [Camera Record Setting] menu.

(A Page 53)

C[SELECT] Button/Indicator

Use the S key to set to the camera selection mode. The indicator lights up when the camera selection mode is set to on. (A Page 36) Press the [FUNCTION] button, [ALARM CLEAR] button and the [SELECT] button at the same time to reboot the NVR Viewer as well as the internal distribution server.

D[PTZ/PRESET] Button/Indicator

Switches between the PTZ mode and PRESET mode of the S key. The mode changes each time the button is pressed. The indicator lights up when PTZ mode is selected and blinks when PRESET mode is selected.

E[SERIAL] Terminal

For connecting the communication control terminals on a mouse (sold separately), flash memory (sold separately) or UPS (sold separately).

F[ZOOM OUT/CANCEL] Button

Selects ZOOM OUT (A Page 35) when PTZ mode is selected and selects a view in PRESET mode.

Cancels the selected values in the Main Menu window. Also, pressing the [ZOOM OUT/CANCEL] button while holding down the [FUNCTION] button changes the resolution of VGA output.

G[ZOOM IN/ENTER] Button

Selects ZOOM OUT (A Page 35) when PTZ mode is selected and selects a view in PRESET mode.

Sets the selected values in the Main Menu window. Also, pressing the [ZOOM IN/ENTER] button while holding down the [FUNCTION] button changes the resolution of VGA output.

You can control the click action of the mouse when the software keyboard is displayed. (A Page 28)

HStatus indicators

[WARNING] Indicator

Lights up when an error occurs. (A Page 156)

Press and hold the [ALARM CLEAR] button to turn off the light.

[ALARM] Indicator

Lights up when an alarm is activated.

Goes off when the [ALARM CLEAR] button is pressed.

[HDD] Indicator

Lights up when the built-in hard disk drive is accessed.

[LOCK] Indicator

Lights up when operation is locked. (A Page 22)

Memo :

●Use the [SERIAL1 to 4] port on the rear panel for additional hard disk drive connection. (A Page 14)

I[FUNCTION] Button

Press the [FUNCTION] together with another button to use the corresponding features.

[Special Key Operations] (A Page 138)

Press the [FUNCTION] button, [ALARM CLEAR] button and the [SELECT] button at the same time to reboot the NVR Viewer as well as the internal distribution server.

16