Selecting the Recording Control Mode

In order to record in the recording control mode, you need to specify the scheduler settings (A Page 53), image recording settings (A Page 55), and picture quality settings (A Page 58) in the main menu [Camera Record Setting].

1 Press and hold down the [REC CONTROL] button while camera recording is stopped ([REC] indicator is off).

●The [REC CONTROL] indicator lights up and the unit switches to the recording control mode.

●Recording will be executed according to the camera record settings.

Memo :

●To stop recording, press and hold down the [REC/STOP] button during recording in a mode other than recording control (the [REC] indicator lights up or appears blinking). After the light of the [REC] indicator goes off, press and hold the [REC CONTROL] button.

●To exit the recording control mode, press and hold down the [REC CONTROL] or [REC/STOP] button.

●Depending on camera status or other circumstances, it may take a while before recording starts after switching to the recording control mode.

Note :

●Do not turn off the power while you are configuring the camera recording settings.

Selecting the Manual Recording Mode1 Press the [REC/STOP] button

●The unit switches to the manual recording mode and starts recording from all cameras.

●The [REC] indicator lights up.

Memo :

●To exit the manual recording mode, press and hold down the [REC/STOP] button. Upon doing so, the light of the [REC] indicator goes off.

●To clear all recording modes, press and hold down the [REC/ STOP] button.

[REC] Indicator

 

 

 

 

WARNING

 

LIVE/BROWSE







 

 

OPERATE

 

 

 

ALARM

 

 

 

 

 

REV

FWD

SELECT



*1/'



HDD

 

 

 

 

 

LOCK

 

REC CONTROL

 

 

 

 

 

 

 

 

PTZ/PRESET









 

 

 

 

 

 

 

 

FUNCTION SEARCH

KEY ALARM CLEAR

REC/STOP

STOP(PB)

PLAY

SERIAL









 

 

 

 

 

 

 

 

 

 

 

 

SKIP

 

CANCEL

ZOOM OUT

ZOOM IN

ENTER

 

 

 

 

[REC CONTROL] Button/Indicator [REC/STOP] Button

Scheduler Setting

This feature lets you specify when to switch each camera to the online mode, as well as the online/offline mode of cameras when an event occurs.

Memo :

●When in the online mode, the camera executes recording according to the camera record settings.

●When in the offline mode, recording is not executed regardless of the camera record settings.

●You can specify the time zone during which e-mail alerts are triggered when motion is detected. You can also specify the time zone to activate automatic patrolling (A Page 93) when using PTZ cameras.

●The minimum unit of time that you can specify is 5 minutes.

Note :

●The online/offline mode has no impact on the manual recording, [EXT REC IN] signal recording, and emergency recording modes.

●Even when AofflineB or AEventB is specified in the scheduler, the camera switches to the AOnlineB mode if [Start cameras on remote live requests](A Page 106) is specified in [General Settings] and live images are displayed on the [NVR Viewer].

●During the interval that is set to AOfflineB, recording will not be performed even when in the AOnlineB mode. During the interval that is set to AEventB, recording is performed according to the recording settings when the unit switches to the AOnlineB mode.

1 Select [Camera Record Setting] from the main menu2 Click the [Scheduler...] button

●The [Scheduler...] screen appears.

[Scheduler...] Button

[Camera Recording Administator] Screen

3 Select the camera for which you want to set a schedule from [Camera].

Select a Camera

[Scheduler] Screen

53