Basic Operation

Playing Back Recorded Images via Mouse Control

This section describes the procedures for viewing recorded images by controlling the mouse.

Notes:

●The recording frame rate may decline when you are using the [Browse] screen.

●When access to the hard disk occurs frequently, such as when recording and playback of recorded images are performed simultaneously, the playback image may pause and the audio sound may be interrupted. (This has no impact on recording to the system or additional hard disk.)

●The audio setting is restored to ANo Audio SourcesB when you return from the setting screen to [Browse]. Set the audio parameters again.

●Set the time zone of the PC to the same time zone as this unit. If recorded images are viewed on a PC with a different time zone, the time displayed on the recorded images of this unit will be converted to the time in the PC’s time zone.

●When the time zone in [OS Setting] is altered, press the [LIVE/ BROWSE] while holding down the [FUNCTION] button to reboot the NVR Viewer.

Displaying the [Browse] Screen

1 Select [Live] from the main menu

●The NVR Viewer starts up and the [Live] screen appears.

2 Double-click the [Browse] tab on the NVR Viewer.

●Similarly, click the [Browse] tab when the [Screen Setup] screen of the NVR Viewer is displayed.

[Browse] Tab

[Browse] Screen

[Views] Section

 

[] Button

 

 

 

 

 

 

 

Viewer

 

 

 

 

 

 

 

[Sequence] Section [Browse] Screen

[Alerts] Section

[Time Navigation] Section

[Audio] Section

[Smart Search] Section

[Export] Section

●It may take a few minutes before the [Browse] screen is displayed.

●If you have specified the camera recording settings without closing the [Browse] screen, the playback images may not appear immediately after you have exited the camera settings.

In this case, AUnable to connect to the server! Reconnecting to the serverB or AUnable to connect to 127.0.0.1:80 on the device name(camera name)! Reconnecting to the serverB will appear on the [Browse] screen. (127.0.0.1:80 is the IP address of the this unit that is currently in operation.)

●If playback is executed when there are no recorded images, the AConnection:[NVR]Camera1 on 127.0.0.1:80B message will continue to appear on the Playback screen.

●To exit the NVR Viewer, click the Close button.

Memo :

●Each image bar comes with an online indicator at the top of the [Browse] screen. The indicator lights up in green each time a new image is displayed.

●Recorded images are saved in the database. “Database” refers to data recorded in this unit.

●When ABefore Database StartB appears on the [Browse] screen, no database (recorded image) is found in the position prior to the currently viewed image.

●When AAfter Database EndB appears on the [Browse] screen, no database (recorded image) is found in the position after the currently viewed image.

Note :

●If several sections are opened on the left side of the [Browse] screen, it may not be possible to display them all in the screen. In this case, double-click the section bars to close the sections.

●Do not switch the view frequently between [Live] and [Browse] within a short time interval.

42