JVC LST0728-001C Size,  NONE, Memo :, Memo :,  Average File

	Item	Preset Values		Description	Reference
					Page
G Serial(VR-N900U)			Lets you specify the settings for the serial ports controlling the		^
			cameras. Please refer to the [Instruction Manual] of the camera in
	Speed	Speed
			use to configure the parameters correctly for all settings.
		1800
		2400
		4800
		 9600
		19200
		38400
	Data Lenght	7
		 8
	Parity	 NONE
		ODD
		EVEN
	Stop Bit	 1
		2
H Encode Mode		Variable File Size	Lets you select the encoding mode for converting analog image		^
	(VR-N900U)	 Average File	data into digital data. You can choose from the following three
			modes.
		Size
			Specify the encoding size control method and target file size when
		Constant File Size	encoding JPEG files.
			Variable File Size:
			The file size increases or decreases depending on the image.
			Specify this to maintain a constant image quality.
			Memo :
			● Note that maximum recording time varies when recording JPEG
			files with this option as the file size increases or decreases.
			Average File Size:
			Multiple JPEG files are encoded to reach the designated size as
			average size.
			Constant File Size:
			Each JPEG file is encoded to reach the designated size. The
			processing load is heavy with AConstant File SizeB, which
			decreases the maximum processing frame rate to approximately
			one quarter of the value.
			Memo :
			● Specify the designated size using the [Quality] bar on the
			[Configure Device] screen under [Camera Record Setting].
			(A Page 58)
	Interpolate	● Select check box	Select this check box to eliminate the comb-shaped noise (noise
		Do not select	that appears jagged) of the moving object. .
		check box
I Mail Send List			Enables you to specify the mail recipient if you have selected AMailB		^
			in the [Error Report] item C. To add a new recipient, type the e-mail
	List	^
			address in the entry field and click the [Add] button. To remove an e-
	Input	^	mail address from the notification list, select the required e-mail
			address in the [List] and click [Delete].
J Close			Closes the [Unit Setting 1] screen.		^

71