4)Use the Dial to select either User 1 or User 2 as the location for your new touch curve.
5)Press the EXEC button (F7) to save your new touch curve.
6)The CP will ask for your confirmation. Press YES (F7) to confirm.
L1
L 2
L 3
L 4
L 5
F 1 | F 2 | F 3 | F 4 | F 5 | F 6 | F 7 |
F1 Cancels the saving procedure.
F7 Proceeds with saving procedure.
R1
R 2
R 3
R 4
R 5
Use the Dial to select either User 1 or User 2 as the location for your new touch curve.
•The user touch curve data is saved automatically even after the power is turned off. However, You must re select the user touch curve each time the power is turned on unless you make your User touch curve the default by selecting “Save Current Settings” from the Power Up Settings screen (See Power Up settings on page 143).
System Menu | P. 121 |
