L3 Selects the LEFT Part to be Transposed or Octave Shifted.
L1
L 2
L 3
L 4
L 5
R 1
R 2
R 3
R 4
R 5
F 1 | F 2 | F 3 | F 4 | F 5 | F 6 | F 7 |
R1 Selects the SOLO Part to be Transposed or Octave Shifted.
R2 Selects the RIGHT1 Part to be Transposed or Octave Shifted.
R3 Selects the RIGHT2 Part to be Transposed or Octave Shifted.
The number of octaves shifted is represented by the number of triangles shown above the sound name for each Part.
Transpose amount is shown at the bottom of the screen.
•The Octave Shift has a range of four octaves in each direction. However, some on board sounds may have a limited range in which they play properly. If you shift too far out of this range, the instrument may sound strange or may not play at all. This has no affect on the CP’s proper function though, and you should feel encouraged to use this feature as a means of getting interesting tonal variations out of the preset Sounds.
Basic Controls | P. 23 |
