Kawai CP205/CP185 manual Instruction for AC power cord U.K

Models: CP205/CP185

1 214
Download 214 pages 10.27 Kb
Page 5
Image 5

Do not wipe the product with benzene or thinner. Doing so may result in discoloration or deformation of the product.

When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then wipe the product.

To reduce the risk of injury, close supervision is necessary when a product is used near children.

Close the topboard when the instrument is not in use.

The product should be serviced by qualified service personnel when:

The power supply cord or the plug has been damaged.

Objects have fallen, or liquid has been spilled into the product.

The product has been exposed to rain.

The product does not appear to operate normally or exhibits a marked change in performance.

The product has been dropped, or the enclosure damaged.

Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and

then contact the shop from which the product was purchased.

CAUTION:

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION:

Pour viter les chocs lectriques, introduire la lame la plus large de

la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

Instruction for AC power cord (U.K.)

Do not plug either terminal of the power cord to the ground of the AC outlet on the wall.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

¥Reorient or relocate the receiving antenna.

¥Increase the separation between the equipment and receiver.

¥Connect the equipment into an outlet on a different electrical circuit from the receiver.

¥Consult the dealer or an experienced radio/TV technician for help.

Canadian Radio Interference Regulations

This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference

Regulations, C.R.C., c. 1374.

V

Page 5
Image 5
Kawai CP205/CP185 manual Instruction for AC power cord U.K