Kodak i800 Series manual Buttons on the Kodak Scanner Properties dialog box

Buttons on the Kodak Scanner Properties dialog box

Following are descriptions of the buttons located at the bottom of the dialog box.

Defaults  when you select Defaults, the message Reset all values to factory defaults? will be displayed. Clicking Yes will reset all values on all tabs to the factory defaults.

Copy  will copy the settings of the front camera to the rear camera for the color/grayscale or bi-tonal camera selected. For example: if you have Front Bi-tonalcamera selected, these values will be copied to the Rear Bi-tonal camera as well. If you have Front Color camera selected, these values will be copied to the Rear Color camera as well. If you have Rear Color camera selected, the values of the Front Color camera will be copied to the Rear Color camera. If you have the Rear Bi-tonalcamera selected, the values of the Front Bi-tonal camera will be copied to the Rear Bi-tonal camera.

OK  saves the values set on all tabs. TWAIN standards require that the value of compression always defaults back to uncompressed, therefore, when using this tool, you must always reset compression values before scanning for bi-tonal and color/grayscale images.

Cancel  closes the dialog box without saving any changes.

A-61510 January 2005 3-5