Buttons on the Scanner Settings dialog box
Following are descriptions of the buttons located at the bottom of the dialog box.
More displays the More Scanner Settings dialog box. This dialog box provides additional image processing settings unique to i800 Scanners.
Area displays the Scan Area dialog box.
Copy this function is only available when using the scanner in Duplex mode. The Copy button provides a convenient way to set up the color/grayscale or binary image settings on one side and transfer them to the other. For example, if you highlight and setup Front Binary, you can use the Copy button to duplicate those settings for the Rear Binary.
Enabled and Selected | Copy |
| Front Color/Grayscale |
| Color/Grayscale |
|
|
Front Binary | Front Binary |
Rear Color/Grayscale | Rear Color/Grayscale |
| Color/Grayscale |
Rear Binary | Rear Binary |
Default when you select Default, the message Reset all values to factory defaults? will be displayed. Clicking Yes will reset all the settings to the factory defaults.
About displays the About dialog box. The About dialog box provides detailed information such as the driver version number, certification status and the version of QuickDriver used to develop this driver.
OK saves the values set on all dialog boxes.
Cancel closes the dialog box without saving any changes.
|
