Image Address area | The Image Address area allows you to enter a starting image address. |
| Current value displays the next image address which will be used if |
| no value is entered in the image address field. |
| Image Address an image address is a unique identifier assigned to |
| each individual document and may contain up to 30 characters |
| consisting of a maximum of 27 digits and 3 delimiters. The structure of |
| this field must match the format defined in the Image Address Template |
| fields. This value is used by the scanner as the next image address |
| which is assigned to the next document which enters the transport. This |
| is also referred to as the Starting Image Address. |
| Document Count this value is used to assign the document count for |
| the next document entering the transport and is incremented |
| sequentially by the scanner unless another document count is received |
| from the host. This value is returned in the image header. The format of |
| this counter is defined on the Printer tab in the Counter field. |
Image Address Template | The Image Address Template area allows you to define an image |
area | address area or choose an existing template. |
| Image Address Template area up to four fields can be defined. |
| Each field may be a maximum of 9 characters. The total image address |
| cannot exceed 27 characters (30 with 3 delimiters). The i800 Series |
| Scanners have more options available for image addressing schemes |
| with the following guidelines: |
| You may define from 0 to 4 fixed fields. |
| Only one field may be assigned to a level. You are only allowed one level |
| 1 field, one level 2 field, and one level 3 field. |
| There is no requirement to have any level field. |
|
