Page size and layout the default paper size is set when a scanner is first selected. You can choose a different paper size using the
NOTE: The Page Size and Page Layout selections also appear on the Scanner Settings dialog box. If you make a change on the Area dialog box, the same selections will appear on the Scanner Settings dialog box and vice versa.
The Page Layout area allows you to select either Portrait or Landscape.
•Portrait will display the image orientation in the shape of a conventional portrait, where height is greater than width.
•Landscape will display the image orientation in the shape of a conventional landscape painting, where width is greater than height.
Area the Area section defines the amount of image data which is returned to the host. It can be defined to be the entire document (Fixed Cropping) or a portion of the document (Relative Cropping). The area can be defined in Pixels, Inches or Centimeters.
•X for Fixed Cropping this is the distance from the left end of the scanner to the
•Y— for Fixed and Relative Cropping this is the position from the top end of the document to the top end of the scanning area. This option is not available if you use Auto Cropping.
•Width — the width of the scanning area.
•Height — the height of the scanning area. If Overscan is not selected, the scanner will not continue capturing beyond the trail edge of the document. For example, if you set up the scanner for
Snap causes the dimensions of the Area box to be controlled in fixed
Rulers reflects the page size and the units of measurement selected.
|
