July | Kodak i800 Series guide

5.Grasp a blotter strip and carefully pull it off the transport. Discard the soiled strips.

6.Install the new blotter strip. Make sure that you align it in the transport channel before pressing the adhesive side into the channel.

7.Re-insert the horizontal belt module.

8.Lower the horizontal transport plate.

9.Close the swing out door.

4-8	A-61169 July 2003

Image 39

Kodak i800 Series manual July

Contents

User’s Guide ElectroMagnetic Compatibility Statements User Precautions Peoples Republic of China Class a Japan Class a Introduction Product description Standard features Speeds Standard configurations Transport speedResolutions Dimension Minimum Maximum Operational Mode Scanner specifications Back of scanner Equipment disposal Information Turning on the scanner To turn on the scanner Using the Scanner July July Adjusting the side guides on the input tray Adjusting the output tray Scanning documents Press Start/Resume∙ Press Stop/Pause Continuous and manual feeding Loading long documents in the feeder Feeding thick documents Operator Control Panel Functions Scanner Enabling and disabling Disabled scanner functions Navigating through the functions on the control panel menu July Mode Running in count-only Press Start/Resume Press Stop/Pause Menu Using the SettingsChanging the alarm Volume Contrast To 4 = lightest, 4 = darkest Changing the display Termination Changing the Scsi July Press Start/Resume Jogging the transport Programmable key assignments Document Printer Document Printer and Patch Reader July July July Improper ink flow Replacing the inkCartridge Locking bar July July Position Setting the printer Patch types Patch Reader Leading Edge July Cleaning the paper path Maintenance Cleaning the upper transport area Vacuum the area Close the top turn baffle July Transport area Cleaning the vertical Cleaning the transport area Lift the roller cover and vacuum the sensors July Cleaning the printer and patch head Cleaning the imaging guides Maintenance and replacement procedures Replacing the feed module Replacing the feed module and feed module tires Module tires Replacing the feed Install each new tire by gently stretching it over the core Replacing the separation roller Separation roller and tires Pad Replacing the separationRoller tires Changing the separation Replacing lamps Cleaning the feed module tires and separation roller tires July Position the new lamp in the lamp holder July Customizing the side guides for self- centering feeding July Changing the output tray side guides July Description CAT No Ordering supplies Clearing the document path Front cover access Top cover access Clearing the document path bi-fold door access July Message Listing Message Error Reset Scanner Action Message Clean imaging guides ActionMessage Clean the S1 sensor Action Message Clean the S2 sensor Action Message Image buffer almost full Action Message Description Feeder self test failed ActionMessage Front image cal unsuccessful Action Message Image address field overflow Action Message Multi-feed count Action Message Power-on self-test succeeded ActionMessage Description Mechanical cal unsuccessful Action Message Motor self test failed Action Message Refeed document set Action Message Settings conflict ActionMessage Description Print head not present Action Message Rear image cal unsuccessful Action Location Message Description Unable to enable ActionMessage Unable to execute command Action Document sensor Problem Possible Solutions Problem solving chart Problem Possible Solutions Maintenance Problem Possible Solutions Eastman Kodak Company