Lift the roller cover and vacuum the sensors | Kodak i800 Series

2. Lift the roller cover and vacuum the sensors.

Roller cover

Sensors

IMPORTANT: When vacuuming the scanner, be careful not to scratch the sensors.

3.Close the roller cover.

4.Lift the horizontal transport plate.

5. Remove the horizontal belt module.

A-61169 July 2003

5-7

Image 50

Kodak i800 Series manual Lift the roller cover and vacuum the sensors

Contents

User’s Guide User Precautions ElectroMagnetic Compatibility Statements Japan Class a Peoples Republic of China Class a Introduction Product description Standard features Dimension Minimum Maximum Operational Mode Standard configurations Transport speedResolutions Speeds Scanner specifications Back of scanner Information Equipment disposal Using the Scanner Turning on the scanner To turn on the scanner July July Adjusting the side guides on the input tray Adjusting the output tray ∙ Press Stop/Pause Scanning documentsPress Start/Resume Loading long documents in the feeder Continuous and manual feeding Feeding thick documents Operator Control Panel Functions Enabling and disabling Scanner Disabled scanner functions Navigating through the functions on the control panel menu July Running in count-only Mode Press Start/Resume Press Stop/Pause Volume Using the SettingsChanging the alarm Menu Changing the display Contrast To 4 = lightest, 4 = darkest Changing the Scsi Termination July Press Start/Resume Jogging the transport Programmable key assignments Document Printer and Patch Reader Document Printer July July July Cartridge Improper ink flowReplacing the ink Locking bar July July Setting the printer Position Patch Reader Patch types Leading Edge July Maintenance Cleaning the paper path Cleaning the upper transport area Vacuum the area Close the top turn baffle July Cleaning the vertical Transport area Cleaning the transport area Lift the roller cover and vacuum the sensors July Cleaning the printer and patch head Cleaning the imaging guides Maintenance and replacement procedures Replacing the feed module and feed module tires Replacing the feed module Replacing the feed Module tires Install each new tire by gently stretching it over the core Separation roller and tires Replacing the separation roller Changing the separation Replacing the separationRoller tires Pad Cleaning the feed module tires and separation roller tires Replacing lamps July Position the new lamp in the lamp holder July Customizing the side guides for self- centering feeding July Changing the output tray side guides July Ordering supplies Description CAT No Front cover access Clearing the document path Top cover access Clearing the document path bi-fold door access July Message Listing Message Clean the S2 sensor Action Message Clean imaging guides ActionMessage Clean the S1 sensor Action Message Error Reset Scanner Action Message Image address field overflow Action Message Description Feeder self test failed ActionMessage Front image cal unsuccessful Action Message Image buffer almost full Action Message Motor self test failed Action Message Power-on self-test succeeded ActionMessage Description Mechanical cal unsuccessful Action Message Multi-feed count Action Message Rear image cal unsuccessful Action Message Settings conflict ActionMessage Description Print head not present Action Message Refeed document set Action Document sensor Message Description Unable to enable ActionMessage Unable to execute command Action Location Problem solving chart Problem Possible Solutions Problem Possible Solutions Maintenance Problem Possible Solutions Eastman Kodak Company