Konica Minolta 2223 user manual Aps

Specifications

Name	Konica 2223
Configuration	Desktop
Platen	Stationary
Development	Dry 2-component magnetic brush
Photoreceptor	OPC drum
Toner	Black
Waste Toner	Toner recycling system
Auto Shutoff	30/60/90/120 minutes, set by service (default setting is 60 min.)
Auto Reset	None or 2 minutes, set by service
Warm Up	Approximately 65 seconds at 68°F (20°C) with 50% RH
Operating Environment	50°~86°F (10°~30°C); 10~80% RH recommended
First Copy Out Time	5.5 seconds, 8.5”x11” Manual/AES
Continuous Copy	1~99
Copying Speed	23cpm: 8.5”x11”; 17cpm: 8.5”x11”R
	15cpm: 8.5”x14”; 12cpm: 11”x17”
Platen Original	Sheet/Book; 11”x17” (280mm x 432mm) maximum
	Book Weight: 15 lbs (6.8kg)
	Book Thickness: 1.6” (40mm)
	Registration: Center line
	Leading edge: Left side
Copy Paper	Size: 11”x17”, 8.5”x14”, 8.5”x11”, 8.5”x11”R, 5.5”x8.5”
	Weight: 16~24 lb bond with tray;
	In bypass: 16~32 lb plain paper and special stock:
	OHP film, labels, 3-hole punch, rag content
	(feed special stock one sheet at a time)
Copy Paper Sources	2 tray ports (250 sheets; service-adjustable)
	Bypass: 50-sheet (16~24 lb);
	user-adjustable, 11”x17”~5.5”x8.5”
	Optional tray: 250 sheets (20 lb bond)
	Drawer Base (DB-307): 1 x 1,000 sheets; (20 lb bond)
	1 x 250 sheets; (20 lb bond)
	Drawer Base (DB-607): 1 x 1,000 sheets; (20 lb bond)
	1 x 250 sheets; (20 lb bond)
	Paper: As recommended by Konica
APS	Automatic Paper Selection (scanning)
AES	Automatic Exposure Selection
Copy Density	Automatic (AES), plus manual density (7 levels)

Specifications Subject To Change Without Notice

S-2 Specifications