Photo Enhance | Konica Minolta 2223 specs

Special Copying

Photo Enhance

The Photo Enhance mode reproduces a gray-scale photo or half-tone image close to that of the original, an improvement over the standard copying mode.

ORIGINAL SIZE: 11" x17" maximum

COPY PAPER: Appropriate paper, as specified in Section 4.

1 Place photo FACE DOWN on platen glass or RADF/ADF, as required.

2 Close document cover, if required.

3 Press PHOTO ENHANCE to illuminate PHOTO indicator.

4 Enter print quantity.

5 Press START PRINT.

6 When copying is completed, press AUTO to exit Photo mode.

7-8 Special Copying

Image 73

Konica Minolta 2223 user manual Photo Enhance

Contents

User’s Manual Konica 2223 Copier Konica 2223 User’s Manual Table of Contents Basic Copying Paper Specifications Duplex Copying Maintenance and SuppliesSpecial Copying Glossary Specifications Troubleshooting Introduction Copier Highlights FeaturesStandard Equipment Optional Equipment To the User Using this Manual Safety Information Canadian Department of Communications Regulations FCC Regulations User Instructions Safety Alert Symbols Machine Safety Labels Safety Information Temperature and Humidity Installation Requirements Plug Socket Power Source Information Internal Machine Components Machine Handling and Care Service Codes Power Saver Check for Routine Safety CheckSpecial Concerns Copier Information Automatic Settings External View Konica 2223 Copier Main Body Internal View Options Control Panel Copier Information Site Requirements Copier Information Turning the Copier On Power Saver Manual Shut-Off Auto Low PowerAuto Shut-Off Initial Machine Settings Automatic SettingsAutomatic Paper Selection APS Automatic Exposure Selection AES Odd-Even Original Counter in 1 s 2 ModeAutomatic Magnification Selection AMS Automatic Humidity Sensor Paper Specifications Originals on Reversing Automatic Document Feeder Radf Originals on Platen GlassOriginals on Automatic Document Feeder ADF Copy Paper in Main Body Trays Copy Paper in Automatic Duplex Unit ADU Copy Paper and Special Stock in BypassCopy Paper in 10-Bin In-Bin Stapler Sorter ST-104 Copy Paper in 10-Bin Off-Line Stapler Sorter ST-103 Paper Size/Weight Compatibility Chart Copy Size Lens Modes Basic Copying Copying from the Platen Glass Basic Copying Auto Copy Copying from the Document Feeder RADF/ADF Copying Mixed Size Originals Bypass Performance Maximum skew 2% Using the Bypass Manual Density Copy Density Copy Size Lens Modes Preset and User Preset Ratios Programming a User Preset Ratio Zoom Mode Special Ratio Table Specifications 10-Bin In-Bin Stapler Sorter ST-104 Using the Sorter Sort Mode with Off-Line Stapler Specifications 10-Bin Off-Line Stapler Sorter ST-103 Stapler Sheet Capacity 20 lb 25 sheets Specifications 20-Bin Off-Line Stapler Sorter ST-216 Group Mode Sort Mode Automatic In-Bin Stapling Staple-Sort Modes for ST-104Manual In-Bin Stapling Off-Line Stapling Option Automatic Duplex Duplex Copying Automatic Duplex 1s2 Mode Using the RADF/ADF Odd-Even Original Counter OFF 1s2 Mode Using the RADF/ADF Odd-Even Original Counter on 1s2 Mode Using the Platen Glass 2s2 Mode Using the Radf 2s1 Mode Using the Radf Manual Duplex Sided to 2-Sided Using the Bypass Duplex Copying Special Copying Shift/Reduce & Shift Using the Platen GlassShift Result Using the RADF/ADF Frame and Fold Erasure Using Frame and Fold Erasure Setting Frame Erasure Setting Fold Erasure Sheet Size Book Copy Photo Enhance OHP Interleave Service, Supplies, and Repairs Daily Maintenance Maintenance and Supplies Service, Supplies, and Repairs Maintenance and Supplies Cleaning the Platen Glass Daily MaintenanceCleaning the Inner Surface of the Platen Cover Cleaning the RADF/ADF Conveyance Belt Surface Removing/Inserting Paper Trays Cleaning the Corona Wire Loading Paper Service-Adjustable Tray Tray 1, 2 LCT Large Capacity Tray Tray User-Adjustable Tray Option Adding Toner Maintenance and Supplies In-Bin Stapler Replacing the Staple Cartridge Off-Line Stapler Removing the Off-Line Corner Stapling Adapter Installing the Off-Line Corner Stapling Adapter Reading the PM Count Preventive MaintenanceExample Message Area Example Print Quantity Window Moving the Copier Troubleshooting Opening and Closing the Copier Troubleshooting User Codes Mishandled Paper Codes Copier Diagram Code J11 Clearing Mishandled Paper Code J12 Code J13 Code J14 Code J15 Codes J31 and J16 When using the bypass Fixing unit is very hot. To avoid burns, do not touch it Code J32 Code J61 Code J62 Code J72 ST-103/ST-216 Code J72 ST-104 Code J92 Code J94 Code J93 Code J95 Reporting Service Codes Service Codes In-Bin Stapler Code J75 Clearing a Wedged Staple Off-Line Stapler Close the stapler Copy Image is TOO Light Troubleshooting Hints ADD Paper is Displayed in Message Area Copy Size Indicator is Flashing Glossary Glossary Document Feeder see Automatic Document Feeder Image Shift see Shift Glossary G-5 Glossary Glossary G-7 Glossary Glossary G-9 Specifications APS AMS Specifications