Maintenance and Supplies
Moving the Copier
Before moving the copier using the instructions below, contact your Konica service representative.
1 Turn the four handles located on both sides of copier until the screw on the handle is at the top.
2 Then withdraw the handles.
3 Turn the extended handles until screw is located at the bottom. Withdraw handles completely.
4 To lock the handles for lifting, turn them until the screw is in the top position, making sure that the pin at the end of the handle is also at the top. Be sure to extend all four handles before lifting the copier.
5 Carefully lift the copier using the extended handles and move it to another location.
6 Return the carrying handles to their original positions by reversing steps 1~4.
