Basic Copying
Copying from the Platen Glass
Use the platen glass when a Document Feeder (RADF/ADF) is not installed or originals cannot be used with the RADF/ADF, e.g., when size is incompatible, or when originals are folded, stapled, or in poor condition.
ORIGINAL SIZE: 11”x17” maximum
ORIGINAL PLACEMENT: Face down, same as copy paper feeding direction
HINTS:
1When copying opened books, use Frame and/or Fold Erasure to eliminate black copy marks along borders and center strip (refer to Special Copying section).
2To minimize toner usage when the original is so thick that the document cover cannot be completely closed, place white paper on the part of the platen glass which is not covered by the original.
1 Raise document cover.
2 Place original FACE DOWN on platen glass, centering it with left measuring guide. Be sure original is as flat as possible.
3 Close cover.
4 Select optional copying features (lens mode, density, copy size, etc.).
5 Use numeric keypad to enter print quantity.
6 Press START PRINT.
NOTE: Press STOP/CLEAR to change print quantity or to stop continuous copying. Press RECALL to check original print quantity. Copying will continue while initial print quantity is displayed.
