Konica Minolta 2223 user manual Using the Bypass, Bypass Performance Maximum skew 2%

Basic Copying

Using the Bypass

Use the bypass to stack up to 50 sheets of copy paper or feed special stock (labels, OHP transparencies, heavy/thin stock, 3-hole punch, rag content) one sheet at a time. The bypass is also used for manual duplex copying (refer to Manual Duplexing for instructions).

STACK MODE: 11”x17”~5.5”x8.5”; 16~24 lb

SINGLE FEED MODE: 25 lb~32 lb, OHP transparencies, label sheets, rag content

PAPER PLACEMENT IN BYPASS: Same as original orientation

BYPASS PERFORMANCE: Maximum skew: 2%;

Maximum image wash at both edges: 5mm

BYPASS TRAY CAPACITY: 50 sheets, 20 lb; feed special stock one sheet at a time

INCOMPATIBLE: 1s2, 2s2, Mixed Size Originals

1 Place original on platen or RADF/ADF.

2 Open bypass tray. Pull out tray extension for large paper.

3 Place up to 50 sheets in bypass and adjust paper guides. Be sure paper is inserted straight.

4 Press COPY SIZE to select

SPECIAL.

5 Enter print quantity.

6 Press START PRINT once to copy a stack, or press after each single sheet is inserted.

7 When completed, push in tray extension and close bypass.

NOTE: Reliability and copy quality are not guaranteed for all special stock. Use only paper and special stock recommended by Konica Business Machines U.S.A., Inc.

5-6 Basic Copying