Daily Maintenance, Cleaning the Platen Glass | Konica Minolta 2223

Maintenance and Supplies

Daily Maintenance

The platen glass and the inner surface of the document cover should be kept clean to prevent soil marks from being copied. Occasionally, an anti-static cleaner may be required to ensure that a static charge is not generated. Ask your Konica service representative to suggest an appropriate cleaner. For optimal copy quality, follow the instructions below.

Cleaning the Platen Glass

1Raise the document cover.

2Wipe the glass with a clean soft cloth, dampened slightly with water or an anti-static cleaner.

Cleaning the Inner Surface of the Platen Cover

1Raise the document cover.

2Wipe the inner surface with a clean soft cloth.

Cleaning the RADF/ADF Conveyance Belt Surface

1Raise the document cover.

2 Wile the RADF/ADF conveyance belt surface with a clean, soft cloth dampened with an anti- static spray.

NOTE: Never use paint solvents, such as benzene or thinners, to clean any portion of the copier. To avoid copier damage, do not spray or pour water or cleaner directly on the platen glass. Do not use any abrasive clean the glass.

Maintenance and Supplies 8-3

Image 77

Konica Minolta 2223 Daily Maintenance, Cleaning the Platen Glass, Cleaning the Inner Surface of the Platen Cover

Contents

User’s Manual Konica 2223 Copier Konica 2223 User’s Manual Table of Contents Basic Copying Paper Specifications Special Copying Maintenance and SuppliesDuplex Copying Glossary Specifications Troubleshooting Introduction Copier Highlights FeaturesStandard Equipment Optional Equipment To the User Using this Manual Safety Information Canadian Department of Communications Regulations FCC Regulations User Instructions Safety Alert Symbols Machine Safety Labels Safety Information Temperature and Humidity Installation Requirements Plug Socket Power Source Information Internal Machine Components Machine Handling and Care Service Codes Power Saver Special Concerns Routine Safety CheckCheck for Copier Information Automatic Settings External View Konica 2223 Copier Main Body Internal View Options Control Panel Copier Information Site Requirements Copier Information Turning the Copier On Power Saver Auto Shut-Off Auto Low PowerManual Shut-Off Automatic Paper Selection APS Automatic SettingsInitial Machine Settings Automatic Exposure Selection AES Odd-Even Original Counter in 1 s 2 ModeAutomatic Magnification Selection AMS Automatic Humidity Sensor Paper Specifications Originals on Reversing Automatic Document Feeder Radf Originals on Platen GlassOriginals on Automatic Document Feeder ADF Copy Paper in Main Body Trays Copy Paper in Automatic Duplex Unit ADU Copy Paper and Special Stock in BypassCopy Paper in 10-Bin In-Bin Stapler Sorter ST-104 Copy Paper in 10-Bin Off-Line Stapler Sorter ST-103 Paper Size/Weight Compatibility Chart Copy Size Lens Modes Basic Copying Copying from the Platen Glass Basic Copying Auto Copy Copying from the Document Feeder RADF/ADF Copying Mixed Size Originals Bypass Performance Maximum skew 2% Using the Bypass Manual Density Copy Density Copy Size Lens Modes Preset and User Preset Ratios Programming a User Preset Ratio Zoom Mode Special Ratio Table Specifications 10-Bin In-Bin Stapler Sorter ST-104 Using the Sorter Sort Mode with Off-Line Stapler Specifications 10-Bin Off-Line Stapler Sorter ST-103 Stapler Sheet Capacity 20 lb 25 sheets Specifications 20-Bin Off-Line Stapler Sorter ST-216 Group Mode Sort Mode Manual In-Bin Stapling Staple-Sort Modes for ST-104Automatic In-Bin Stapling Off-Line Stapling Option Automatic Duplex Duplex Copying Automatic Duplex 1s2 Mode Using the RADF/ADF Odd-Even Original Counter OFF 1s2 Mode Using the RADF/ADF Odd-Even Original Counter on 1s2 Mode Using the Platen Glass 2s2 Mode Using the Radf 2s1 Mode Using the Radf Manual Duplex Sided to 2-Sided Using the Bypass Duplex Copying Special Copying Shift Result Using the Platen GlassShift/Reduce & Shift Using the RADF/ADF Frame and Fold Erasure Using Frame and Fold Erasure Setting Frame Erasure Setting Fold Erasure Sheet Size Book Copy Photo Enhance OHP Interleave Service, Supplies, and Repairs Daily Maintenance Maintenance and Supplies Service, Supplies, and Repairs Maintenance and Supplies Cleaning the Platen Glass Daily MaintenanceCleaning the Inner Surface of the Platen Cover Cleaning the RADF/ADF Conveyance Belt Surface Removing/Inserting Paper Trays Cleaning the Corona Wire Loading Paper Service-Adjustable Tray Tray 1, 2 LCT Large Capacity Tray Tray User-Adjustable Tray Option Adding Toner Maintenance and Supplies In-Bin Stapler Replacing the Staple Cartridge Off-Line Stapler Removing the Off-Line Corner Stapling Adapter Installing the Off-Line Corner Stapling Adapter Reading the PM Count Preventive MaintenanceExample Message Area Example Print Quantity Window Moving the Copier Troubleshooting Opening and Closing the Copier Troubleshooting User Codes Mishandled Paper Codes Copier Diagram Code J11 Clearing Mishandled Paper Code J12 Code J13 Code J14 Code J15 Codes J31 and J16 When using the bypass Fixing unit is very hot. To avoid burns, do not touch it Code J32 Code J61 Code J62 Code J72 ST-103/ST-216 Code J72 ST-104 Code J92 Code J94 Code J93 Code J95 Reporting Service Codes Service Codes In-Bin Stapler Code J75 Clearing a Wedged Staple Off-Line Stapler Close the stapler Copy Image is TOO Light Troubleshooting Hints ADD Paper is Displayed in Message Area Copy Size Indicator is Flashing Glossary Glossary Document Feeder see Automatic Document Feeder Image Shift see Shift Glossary G-5 Glossary Glossary G-7 Glossary Glossary G-9 Specifications APS AMS Specifications