Code J72 ST-103/ST-216 | Konica Minolta 2223 guide

Troubleshooting

Clearing Mishandled Paper (continued)

Code J72 (ST-103/ST-216)

CAUTION

The fixing unit inside the main body is very hot. To prevent accidental burns, do not touch it.

Do not touch the high voltage area of the main body indicated by a caution label.

1 Slide the sorter away from the copier main body, to the left.

2 Open the sorter door and remove the mishandled paper.

3 Open the front door and check the paper path of the main body.

4If the paper cannot be removed, remove the

mishandled paper from the sorter bin side.

5Close sorter cover, return the sorter to its original position, and open and close the copier front door.

6 If the paper cannot be removed using the above procedure, open the copier front door and open the upper part of the main body. Then remove the mishandled paper from the right hand side of the paper exit. When completed, close the upper main body and copier front door.

Troubleshooting 9-11

Image 99

Konica Minolta 2223 user manual Code J72 ST-103/ST-216

Contents

User’s Manual Konica 2223 Copier Konica 2223 User’s Manual Table of Contents Basic Copying Paper Specifications Maintenance and Supplies Duplex CopyingSpecial Copying Glossary Specifications Troubleshooting Introduction Optional Equipment FeaturesCopier Highlights Standard Equipment To the User Using this Manual Safety Information Canadian Department of Communications Regulations FCC Regulations User Instructions Safety Alert Symbols Machine Safety Labels Safety Information Temperature and Humidity Installation Requirements Plug Socket Power Source Information Internal Machine Components Machine Handling and Care Service Codes Power Saver Routine Safety Check Check forSpecial Concerns Copier Information Automatic Settings External View Konica 2223 Copier Main Body Internal View Options Control Panel Copier Information Site Requirements Copier Information Turning the Copier On Power Saver Auto Low Power Manual Shut-OffAuto Shut-Off Automatic Settings Initial Machine SettingsAutomatic Paper Selection APS Automatic Humidity Sensor Odd-Even Original Counter in 1 s 2 ModeAutomatic Exposure Selection AES Automatic Magnification Selection AMS Paper Specifications Copy Paper in Main Body Trays Originals on Platen GlassOriginals on Reversing Automatic Document Feeder Radf Originals on Automatic Document Feeder ADF Copy Paper in 10-Bin Off-Line Stapler Sorter ST-103 Copy Paper and Special Stock in BypassCopy Paper in Automatic Duplex Unit ADU Copy Paper in 10-Bin In-Bin Stapler Sorter ST-104 Paper Size/Weight Compatibility Chart Copy Size Lens Modes Basic Copying Copying from the Platen Glass Basic Copying Auto Copy Copying from the Document Feeder RADF/ADF Copying Mixed Size Originals Bypass Performance Maximum skew 2% Using the Bypass Manual Density Copy Density Copy Size Lens Modes Preset and User Preset Ratios Programming a User Preset Ratio Zoom Mode Special Ratio Table Specifications 10-Bin In-Bin Stapler Sorter ST-104 Using the Sorter Sort Mode with Off-Line Stapler Specifications 10-Bin Off-Line Stapler Sorter ST-103 Stapler Sheet Capacity 20 lb 25 sheets Specifications 20-Bin Off-Line Stapler Sorter ST-216 Group Mode Sort Mode Staple-Sort Modes for ST-104 Automatic In-Bin StaplingManual In-Bin Stapling Off-Line Stapling Option Automatic Duplex Duplex Copying Automatic Duplex 1s2 Mode Using the RADF/ADF Odd-Even Original Counter OFF 1s2 Mode Using the RADF/ADF Odd-Even Original Counter on 1s2 Mode Using the Platen Glass 2s2 Mode Using the Radf 2s1 Mode Using the Radf Manual Duplex Sided to 2-Sided Using the Bypass Duplex Copying Special Copying Using the Platen Glass Shift/Reduce & ShiftShift Result Using the RADF/ADF Frame and Fold Erasure Using Frame and Fold Erasure Setting Frame Erasure Setting Fold Erasure Sheet Size Book Copy Photo Enhance OHP Interleave Service, Supplies, and Repairs Daily Maintenance Maintenance and Supplies Service, Supplies, and Repairs Maintenance and Supplies Cleaning the RADF/ADF Conveyance Belt Surface Daily MaintenanceCleaning the Platen Glass Cleaning the Inner Surface of the Platen Cover Removing/Inserting Paper Trays Cleaning the Corona Wire Loading Paper Service-Adjustable Tray Tray 1, 2 LCT Large Capacity Tray Tray User-Adjustable Tray Option Adding Toner Maintenance and Supplies In-Bin Stapler Replacing the Staple Cartridge Off-Line Stapler Removing the Off-Line Corner Stapling Adapter Installing the Off-Line Corner Stapling Adapter Example Print Quantity Window Preventive MaintenanceReading the PM Count Example Message Area Moving the Copier Troubleshooting Opening and Closing the Copier Troubleshooting User Codes Mishandled Paper Codes Copier Diagram Code J11 Clearing Mishandled Paper Code J12 Code J13 Code J14 Code J15 Codes J31 and J16 When using the bypass Fixing unit is very hot. To avoid burns, do not touch it Code J32 Code J61 Code J62 Code J72 ST-103/ST-216 Code J72 ST-104 Code J92 Code J94 Code J93 Code J95 Reporting Service Codes Service Codes In-Bin Stapler Code J75 Clearing a Wedged Staple Off-Line Stapler Close the stapler Copy Image is TOO Light Troubleshooting Hints ADD Paper is Displayed in Message Area Copy Size Indicator is Flashing Glossary Glossary Document Feeder see Automatic Document Feeder Image Shift see Shift Glossary G-5 Glossary Glossary G-7 Glossary Glossary G-9 Specifications APS AMS Specifications