
Copier Information
Automatic Settings
Initial Machine Settings
The machine settings listed below describe the initial condition of the copier after warm up is completed. These initial settings will be restored automatically if Auto Reset is set at 2 minutes, or if AUTO is pressed. ADF, AES, APS, and Sorter are service adjustable.
Print Quantity: 1
Magnification: 1.00
AES: ON
APS: ON
ADF: ON, if equipped
Sorter: OFF, if equipped
Special Features: OFF
Auto Reset None or 2 Minutes
If Auto Reset is activated by your service representative, the initial machine settings will reset automatically after 2 minutes have elapsed since manual selections were made. Otherwise, the initial machine settings can be restored manually by pressing AUTO on the control panel.
Automatic Paper Selection (APS)
APS functions as a scanless operation. When the APS light is on, the appropriate copy paper size feeds automatically for the following original sizes on both the platen glass and RADF/ADF: 11”x17”, 8.5”x14”, 8.5”x11”, or 8.5”x11”R. ADF originals that are 5.5”x8.5” will be detected as 8.5”x11”. The next larger copy size will be selected for