Copier Information
Power Saver (continued)
Auto Low Power
If certain period of time (detected from 2, 5, 10, 15, 30 minutes) has passed after completion of the last copy, with the copier kept ready for copying, power saving will work automatically. The power saving message will be displayed, but the power saver indicator will not light.
The initial time is 15 minutes, and the time can be changed by service. Please contact your service representative.
To release the auto low power mode, press any key except START PRINT and POWER SAVER.
Manual Shut-Off
1Press POWER SAVER on the control panel. The LED will light and all other areas of the control
panel will not be lit.
2 To release the
Auto Shut-Off
When a certain period of time has elapsed since completion of a copying operation (detected from 30, 60, 90, 120 minutes, or no setting) and the copier is ready for copying, the
The initial setting time of 60 minutes can be changed by service. Please contact your service representative.
To release the
START PRINT.
Copier Information
