Troubleshooting
Clearing Mishandled Paper (continued)
Codes J31 and J16
CAUTION
To avoid electric shock, do not touch the high voltage area indicated by a caution label inside the main body.
1Press release buttons on left and right sides of
copier and open copier front door. Then, push down on toner box cover and raise the release lever to open upper part of main body.
2 Open right side cover of copier and remove mishandled paper from inside main body. Then, return the cover to its original position.
3 Push down the toner box cover to close the upper part of the main body.
NOTE: If J31 is indicated and the power is switched off without mishandled paper being removed, J16 will be displayed when power is switched on.
4 When using the bypass:
Remove mishandled paper from the bypass tray opening.
